Manual Gram kfd 35 01 (page 10 of 60) (English, Dutch)

354420

Zoom out

Zoom in

1/60

Alarm codes

E1 – temperature sensor fault in the re-

frigerator’s chamber

E2 – temperature sensor fault in the

freezer’s chamber

E4 – door is open

E5 – too high temperature inside the

freezer’s chamber

E1, E2

One of the temperature sensors has been

damaged. Call technical service. The

built-in emergency program maintains the

admissible temperature until the fault will

be eliminated by the authorized technical

service.

The door of the refrigerator’s chamber has

been opened for more than 3 minutes.

The alarm code disappears when the

door is closed.

Display brightness adjustment

By pressing and holding the pushbutton

(10) and

- pressing at the same time the push-

button ▲ (9), the display brightness

increases,

- pressing at the same time the push-

button (8), the display bright-

ness decreases.

When adjusting the display brightness,

the display shows the following indica-

tions:

1.8 – minimum brightness

2.8 – medium brightness

3.8 – maximum brightness (manufactur-

er’s setting).

Alarms

Normal use of the refrigerator-freezer may

cause different situations leading to inter-

ruption of various functions and unstable

operation of the entire equipment as a

consequence. These interruptions are

shown on the display as the alarm code

(an E followed by a number) and signalled

by the acoustic alarm.

In case there will be several faults the

alarm codes shall be displayed in turn.

The temperature inside the freezer’s

chamber has been exceeding.

Interrupting an alarm

The acoustic alarm can always be inter-

rupted by opening the door and/or press-

ing any push-button.

The alarm code E4 - E5 can be cancelled

by pressing for 7-8 seconds at the same

time the push-buttons.

The exception: in case of the alarm E1 it

is possible to cancel the alarm only after

replacing damaged sensors.

In such cases please contact Gram Serv-

ice Center.

▼

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gram kfd 35 01 in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gram kfd 35 01 Manual

Product: