354333

Gram kf 282 Manual

25
Zoom out
Zoom in
Previous page
1/40
Next page
25
The appliance is intended for connection to
alternating current.
The connection values for voltage (V) and
frequency (Hz) are given on the nameplate 3 in the
cabinet.
Power must be connected via a wall socket with
switch. The wall socket should be easily
accessible.
All earthing requirements stipulated by the local
electricity authority must be observed. The
GB
3
Placement
in cold rooms
Electrical connection
appliance plug and wall socket should then give
correct earthing. If in doubt, contact your local
supplier or an authorised electrician.
WARNING
The flexible cord (mains lead) fitted to this appliance
has three cores for use with a 3-pin 13-amp or
3-pin 15-amp plug. If a BS 1363 (13-amp) fused
plug is used, it should be fitted with a 13-amp fuse.
IMPORTANT
The cores in this mains lead are coloured in
accordance with the following code:
GREEN-AND-YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
These colours might not correspond with the colour
markings identifying the terminals in your plug.
Proceed as follows:
Connect the GREEN-AND-YELLOW core to the
plug terminal marked “E” or by an earth symbol, or
coloured GREEN or GREEN-AND-YELLOW.
Connect the BLUE core to the plug terminal marked
“N” or coloured BLACK. Connect the BROWN
core to the plug terminal marked “L” or coloured
RED.
Illustration shows how easy it is to change
the doors from right-hinged to left-hinged - or vice
versa.
Lay the appliance on its back with the doors up.
Remove the door handles.
Take off the upper hinge bracket and remove the
upper door. Take off the middle hinge and remove
the lower door.
Unscrew the adjusting screws from the lower
hinge brackets and take the brackets off.
4
You can change the
doors from right-
hinged to left-hinged or
vice versa yourself
Placing the appliance in a room where the
temperature is lower than +16°C (e.g. in unheated
buildings) can pose problems if the appliance has
only one compressor and one control system.
The temperature sensor will register that it is
sufficiently cold and will therefore not start cooling
the refrigerator section. This will also lead to
insufficient cooling of the freezer and possibly
cause the thawing of frozen foods.
Move the pin on the hinge bracket to the other
threaded hole before refitting the hinge brackets on
the opposite lower side of the cabinet.
Remember to replace the shim washer on the pin.
Refit the adjusting screws.
Replace the lower door.
Refit the middle hinge on the opposite side.
Remember to replace the shim washer on the
middle hinge pin.
Replace the upper door.
Refit the upper hinge bracket on the opposite side.
Refit the door handles.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gram kf 282 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gram kf 282 in the language / languages: English, Dutch, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info