Manual Gram kf 20201g (page 26 of 40) (English, Dutch, Danish, Swedish, Norwegian, Finnish)

354291

Zoom out

Zoom in

1/40

The thermostat knob setting can be changed from

1 (warmest) to 7 (coldest).

When the appliance is started the thermostat should be

in its middle setting „4”. After an hour or two the cabinet

will have cooled down. If a lower temperature is required,

turn the thermostat knob towards "7". If a higher

temperature is required, turn the knob towards "1".

Refrigeration is switched off when the thermostat knob

setting is "0".

If during transport the fridge/freezer has been laid

down, or if it has been stored in cold surround-

ings (colder than +5°C) it must be allowed to stabi-

lise for at least two hours before being switched on.

Start the fridge/freezer by plugging into a wall

socket.

Important! If the mains lead has been damaged, it must be

replaced with a corresponding type supplied by Gram A/S

or one of Gram's service centres.

Brief temperature variations are normal and occur when:

- the cabinet is filled with fresh items,

- the door is left open for longer periods.

Items of food in the cabinet will not be affected by

these variations and the temperature will quickly

return to normal.

The temperature in the freezer is closely related to the

setting in the refrigerator in cabinets with only one

compressor.

If quick freezing down is required the cabinet sho-

uld be set to run at the lowest temperature, i.e.

"7". As this setting affects both the refrigerator and the

freezer, personal experience should be used to deter-

mine how long the quick-freeze (and thus the low

refrigerator temperature) should last. After freezing

down, the normal temperature setting should again be

chosen.

PLEASE NOTE!

Pack your frozen foods in airtight and watertight

material in order to avoid drying out. Portions

should be as flat as possible to allow rapid

freezing down.

Switch off the compressor by turning the thermostat

knob to "0".

Cleaning the refrigerator

The refrigerator section has automatic defrosting.

The cabinet is best cleaned with a weak soap so-

lution and a soft cloth. Never use cleaning agents

that scour. Clean the sealing strip around the door

regularly to prolong its life. Use only water to clean

the sealing strip. Any loose frost on the evapora-

tor can be removed using a plastic or wooden

scraper. Never use a knife or a sharp object, as

these can damage the evaporator.

The plastic parts of the cabinet will not withstand

boiling water (max. 85°C).

Clean the defrost water drain with the accompa-

nying cleaning implement.

Brief temperature varia-

tion

Freezing down

Changing the tempera-

ture

Starting up

Cleaning/defrosting

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gram kf 20201g in the language / languages: English, Dutch, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 0,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gram kf 20201g Manual

Product: