343646
25
Zoom out
Zoom in
Previous page
1/40
Next page
25
Illustration shows how easy it is to change the
doors from right-hinged to left-hinged - or vice versa.
(The table top on model KF 130 and KF 132 should
be taken off first by removing two screws at the front
of the cabinet and three at the back).
The fridge/freezer must not be laid horizontally
while being transported or moved. If the appliance
has been tilted more than 40°, the power supply
must not be connected until the appliance has
stood upright for at least two hours.
The appliance is intended for connection to alternating
current. The connection values for voltage (V) and
frequency (Hz) are given on the nameplate in the
cabinet.
Power must be connected via a wall socket with switch.
The wall socket should be easily accessible.
All earthing requirements stipulated by the local
electricity authority must be observed. The appli-
ance plug and wall socket should then give cor-
rect earthing. If in doubt, contact your local suppli-
er or an authorised electrician.
WARNING
The flexible cord (mains lead) fitted to this appli-
ance has three cores for use with a 3-pin 13-amp
or 3-pin 15-amp plug. If a BS 1363 (13-amp) fused
plug is used, it should be fitted with a 13-amp fuse.
IMPORTANT
The cores in this mains lead are coloured in
accordance with the following code:
GREEN-AND-YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
These colours might not correspond with the colour
markings identifying the terminals in your plug.
Proceed as follows:
Connect the GREEN-AND-YELLOW core to the
plug terminal marked “E” or by an earth symbol, or
coloured GREEN or GREEN-AND-YELLOW. Con-
nect the BLUE core to the plug terminal marked “N” or
coloured BLACK. Connect the BROWN core to the
plug terminal marked “L” or coloured RED.
GB
3
2
Electrical connection
You can change the
door from right-hinged
to left-hinged or vice
versa yourself
4
Reversing the freezer door:
Unscrew the door and the bracket. Turn the door
180°. Re-attach the door and bracket on the opposite-
side.
Switch the cabinet off by turning the thermostat
knob to ”0”. Empty the cabinet and lay the
appliance on its back with the doors up. Begin by
removing the door handles. Tilt the cabinet 40° in
order to gain access to the lowest hinge. Remove
the adjustable feet.
Remove the three screws holding the lowest
bracket in place using a Phillips screwdriver. (1).
Remove the door and unscrew the three screws
from the bracket on the base on the cabinet (2).
Before refitting the brackets on the opposite side of
the cabinet, move the threaded pin on the hinge
bracket to the other threaded hole. Remove the
threaded pin under the control panel using a Phillips
screwdriver and move it to the opposite side. (3).
Refit the door and screw the bottom hinge into
position using a Phillips screwdriver. Refit the
adjustable feet and, finally, refit the door handle.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gram kf 130 11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gram kf 130 11 in the language / languages: English, Dutch, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info