460595
8
Zoom out
Zoom in
Previous page
1/32
Next page
8
GB
Switching ON/OFF the freezer
Switching ON the freezer: press and hold
the pushbutton (1). The operation of
switching on the freezer is signalled by
the green light-emitting LED (3), and the
real temperature inside the freezer’s
chamber shall be shown on the display.
Switching OFF the freezer: press and
hold the pushbutton (2).
Temperature inside the freezer
The set and displayed temperatures
are the freezer’s average temperatures.
It should be remembered that the fol-
lowing, among others, impact the tem-
perature of the freezer chamber: the
temperature of the environment, the
level to which the chamber is filled with
food products, frequency of the door
being opened, the level of frost on
cooling elements inside. In an event of
a significant change in any of the
above listed factors, the temperature of
the freezer should be set appropriately,
e.g., if the temperature of the environ-
ment is low, lower the freezer tempera-
Temperature regulation
The temperature in the freezer’s chamber
can be set within the range from -23
o
C
up to -16
o
C. When pressing and holding
the FREEZE pushbutton (4), the set
temperature shall be shown on the
display. When pressing the pushbutton
(7) or pushbutton (8) it is
possible to modify setting of the
temperature inside the freezer.
Every pressing of the pushbutton shall
activate a brief acoustic signal. In case of
the power supply failure or
disconnecting the power supply to the
freezer, the control will keep in the
memory the latest settings after the power
supply has been restored.
ture and wait 24 hours.
Quick freezing
Quick freezing at a low temperature is
important to maintain the quality of the
food products. Quick freezing is activated
by pressing and holding the function
button (9) and pressing the FREEZE
pushbutton (4). The blue light-emitting
LED (10) switches on signalling
activation of the quick freezing function.
You can chose between freezing in 24 or
48 hours:
- by holding the function button (9) and
pressing once the FREEZE
pushbutton (4) you switche on the
24-hours quick freezing function
and “24” is shown on the display,
- by holding the function pushbutton
(9) and pressing twice the FREEZE
pushbutton (4) you switch on the 48-
hours quick freezing function and
“48” is shown on the display,
- the next pressing of the pushbutton
(4) switches off the quick freezing
function and switches off the blue
light-emitting LED.
The quick freeze function will be
automatically disabled after 24 or 48 hours.
After pressing the quick freezing function
pushbutton, the indication “24” or “48” is
displayed for 5 seconds. Afterwards the
real temperature inside the freezer’s
chambers will be shown on the display.
It is recommended to switch on the quick
freezing function (24 or 48 hours) for
approximately 2 hours before loading the
freezer’s chamber with large quantities
of the food products.
Brief temperature variations
Brief temperature variations are normal
and may occur when for example the fresh
food products are stored in the freezer or
when the door is open for a longer time.
ss
ss
s
t t
t t
t
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gram FSD 29 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gram FSD 29 in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info