506444
8
Zoom out
Zoom in
Previous page
1/32
Next page
Toaster TO 100 / TO 101
EN
8
level, non-slip and heat resistant base
that has sufcient load bearing capacity.
Select the place of location so that chil-
dren cannot reach the hot surfaces of the
unit.
The unit is not intended for installation in
a wall or a built-in cupboard.
Do not set up the unit in a hot, wet or
moist environment.
The electric socket must be readily acces-
sible so that the power cord can be easily
unplugged.
The unit emits a great amount of heat to-
wards the top. Never place the unit on a
cupboard, under curtains or next to com-
bustible materials.
Never place the unit near paper, fabric or
similar materials. The bread can burn.
Before the rst use
When using for the rst time, operate the
unit 1 - 2 times at the highest level without
any toast as it is possible that a slight odour
will develop due to possible dust remnants
on the heating spirals.
Making toast
Connect the unit to the mains supply:
Put the toasting goods into the slot.
Select the desired degree of browning (1
light - 6 very dark)
Press the lift button down until it latches.
Extra-lift
The extra-lift eases removing the toasted
goods.
Lift the lift button and take out the toasted
goods.
Bread slice centring
It does not matter if you want to toast large
or small slices of bread, or thick or thin ones,
the bread slice centring device always posi-
tions your toasted goods at the right place
and ensures uniform browning on both
sides.
Attachment for buns
The attachment for buns can also be used
as a warmer for your freshly toasted bread.
Simply place the toasted goods on the bun
attachment.
Defrost feature
important!
It is not necessary to adjust
the control knob as the de-
frost time is preset.
Put the frozen toasting goods into the
slot.
Press the
*
button.
Press the lift button down until it latches.
Stop feature
Press the stop button.
The toasting process is interrupted.
Bun warm-up feature
To warm up buns, proceed as below:
Place the bun attachment on the unit.
Place the buns on the bun attachment.
Set the browning degree control to be-
tween steps 2 and 3.
Press the lift button down until it latches.
When the lift button returns to the top,
turn the buns over once and repeat the
process.
CAUTION
The attachment for buns is hot
during toasting; do not touch it.
Cleaning
Clean the exterior of the unit with a soft,
moist cloth. If heavily soiled, a mild deter-
gent can be used.
Crumbs that have fallen down collect in
the crumb tray.
Press the "Push" button.
Remove the crumb tray and empty the
crumbs.
Replace the crumb tray.
Disposal
At the end of its service life, this product
must not be disposed through normal do-
mestic waste; rather it must be disposed
at a collection point for recycling electronic
domestic refuse. The symbol on the product
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graef TO 101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graef TO 101 in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish, Norwegian as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info