715578
24
Zoom out
Zoom in
Previous page
1/60
Next page
24
Unpacking
Proceed as follows to unpack the unit:
Pull the unit out of the cardboard box.
Remove all packaging and possible stickers on the unit (do not remove the
name plate).
Requirements on the installation location
For safe and fault-free operation of the unit, the following has to observed during
installation:
Use a rm, even, horizontal, non-slip and heat resistant surface with a sufcient
load capacity.
Choose the location in such a way that children cannot reach moving parts (in
particular the blade) of the unit.
The unit is not designed for installation in a wall or a built-in cupboard.
Do not set up the unit in a hot, wet or moist environment.
The power outlet must be easily accessible so that the power cable can be
quickly removed in case of emergency.
Prior to rst use
Clean all individual parts thoroughly in order to remove potential production left-
overs. See “Cleaning”.
Operation
NOTE
The maximum duration of use is abt. 15 minutes. Subsequently let the unit
cool down at room temperature (approx. 1 hour).
IMPORTANT!
Handle the blade with care as it may be sharp and may lead to injuries.
The smooth side of the knife must point in direction of worm.
Check to see that the opening is on the locating bolt in the housing.
Turn on the control knob to “R” when food has got stuck in the worm. Hold
this button for approx. 5 seconds.
Never put your ngers into the feed chute. Always use the stuffer.
Remove or place the worm housing only at standstill and the connecting cable
removed.
Mincing machine attachment
Take the requested perforated disc from the storage compartment.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graef FW700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graef FW700 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 4,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info