715541
24
Zoom out
Zoom in
Previous page
1/76
Next page
24
DISPOSAL OF THE PACKAGING
The packaging protects the unit against transport damage. The packaging materi-
als are selected according to the environmental compatibility and disposal-related
aspects and can be recycled. The return of packaging into the material cycle saves
raw material and reduces the waste volume. Dispose of the packaging material
no longer needed at collection points for the “Green Dot” recycling system (in
Germany).
IMPORTANT!
If possible, keep the original packaging during the guarantee period of the unit
in order to be able to properly pack and transport the unit in the guarantee case.
REQUIREMENTS ON THE INSTALLATION LOCATION
For safe and fault free operation of the unit, the following requirements of the
installation location have to be met:
● The unit has to be placed on a solid, at, horizontal, and non-slipping surface
with a sufcient weight-carrying capacity.
● Make sure that the unit cannot topple over and does not stand directly in front
of a wall.
● Do not place the appliance on hot surfaces, such as hotplates, or near them.
● Never use the appliance outdoors, and always keep it in a dry place.
● The unit is not designed for installation in a wall or a built-in cupboard.
● Do not set up the unit in a hot, wet or moist environment.
● Do not place the unit on paper / newsprint paper or loose surfaces. They might
be drawn in and clog the ventilation slots. Make sure that the ventilation slots
are not covered up.
● Place the unit at least 30 cm away from a wall.
● The socket has to be easily accessible so that the power cable can be removed
easily in case of emergency.
ELECTRICAL CONNECTION
For safe and fault-free operation of the unit, the following requirements have to
be met during the electrical connection:
● Before connecting the unit, compare the connecting data (voltage and fre-
quency)
on the type plate with those of your energy network. These details must corre-
spond so that no damage occurs to the unit. In case of doubt ask your trained
electrician.
● The socket has to be protected at least by a 10 amps circuit breaker.
● Make sure that the power cable is not damaged and is not laid across hot
surfaces or sharp edges.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graef DA 506 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graef DA 506 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graef DA 506

Graef DA 506 Manual - German - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info