506397
11
Zoom out
Zoom in
Previous page
1/16
Next page
Coffee Grinder CM 95
© Gebr. Graef GmbH & Co. KG - 01
EN
11
How to programm and
grind measurements
noTe
The factory default setting for
cup
is 12 seconds, and for
cups is 20
seconds.
To reset original factory default set-
tings, press and hold the program P
button for a period of 5 seconds. All
three buttons will ash once after 1
second - continue pressing the pro-
gram P button and all three buttons
will ash three times at 5 seconds. This
will indicate the factory default set-
tings have been restored.
Position the group handle with grind fun-
nel positioned on top into the group hand-
le locator.
Flip the switch to the ‘Auto’ position.
On the control panel, press and hold the
program P button for a period of 1 second
- all three buttons will ash once indicating
you have activated program mode. Remo-
ve your nger from the program P button.
The program P button will stay fully illumi-
nated, while the
button and but-
tons will soften in brightness.
noTe
The programming mode can be
aborted at any stage by pressing the
program P button again.
Select either the
cup or but-
ton to program the grind time for that
selected button. The selected button
will begin to ash, and the motor will
become activated. Ground coffee will
begin to deliver into the group handle.
To stop the coffee grind and set your
programmed
or grind meas-
urement, re-select the
or
button that was previously selected
(this is indicated by the ashing but-
ton). The motor will be de-activated,
and the time of the selected
or
function will be stored.
noTe
Allowable program time for
and
uttons is 2 sec – 40 sec..
Cleaning
Old coffee remains in the unit can lead to
oxidation. That spoils the beverage; it can
cause an unpleasant, rancid taste. The units
should always be in optimum condition to
be able to provide optimum espresso at any
time.
imporTanT!
Spots and marks on the surface of the
burrs are part of the hardening pro-
cess. These marks do not affect the
performance of the grinder or the tas-
te of the coffee.
Ensure the unit is switched off and un-
plugged from the power outlet.
Clean the exterior of the unit with a soft,
moist cloth. If heavily soiled, a mild deter-
gent can be used.
Take off the coffee bean container. Press it
down and turn counter clockwise.
Take out the unused beans and put them
in an airtight container so they stay fresh.
Clean the coffee bean container and the
coffee container with warm water and a
little detergent.
After that, dry both receptacles well.
Cleaning the burrs
If the coffee grinder is used frequently (eve-
ry day), the burrs need to be cleaned every
three weeks to ensure best performance of
the coffee grinder. Regular cleaning helps
the burrs achieve consistent grinding re-
sults, which is especially important when
grinding coffee for espresso
Remove the coffee bean container as de-
scribed in “Cleaning”.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graef CM 95 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graef CM 95 in the language / languages: English, German as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info