768344
9
Zoom out
Zoom in
Previous page
1/65
Next page
15 16
Installation
with base
See images - 
Fit the ISOFIX guides with the
ISOFIX anchor points.
The ISOFIX guides can protect
the surface of the vehicle seat
from being torn. They can also
guide the ISOFIX connectors.
Unfold the load leg from
storage compartment.
Line up the ISOFIX connectors
with the ISOFIX guides,
and then click both ISOFIX
connectors into the ISOFIX
anchor points.
Make sure that both ISOFIX
connectors are securely
attached to their ISOFIX
anchor points. There should
be two audible clicks and the
colors of the indicators on
the both ISOFIX connectors
should be completely green.
Check to make sure the
base is securely installed by
pulling on the both ISOFIX
connectors.
After placing the base on the
vehicle seat, extend the load
leg to floor. When the load
leg indicator shows green, it
means it is installed correctly.
When the load leg indicator
shows red, it means the load
leg is in the wrong position.
Make sure the load leg is in
full contact with the vehicle
floor pan.
Squeeze the load leg
releasing button, then shorten
the load leg upwards.
The completely assembled
base is shown as 
This infant carrier is suitable
for vehicle seats with i-Size
ISOFIX anchor points with the
Base.
The ISOFIX connectors must
be attached and locked onto
the ISOFIX anchor points.
The load leg must be installed
correctly with green indicator.
 Push the infant carrier down
into the base, if the enhanced
child restraint is secure, the
enhanced child restraint
indicator shows green. 
Pull up on the infant carrier to
be sure it is securely latched
into the base.
 Press the ISOFIX adjustment
button and push the base
back against the vehicle seat
until tight.
 To release the infant carrier,
pull the infant carrier up while
pull out the stroller fix release
button.
 To remove the base, press the
secondary lock button first
and then the ISOFIX releasing
button on the ISOFIX
connectors before removing
the base from the vehicle seat.
Securing Child
in the Enhanced
Child Restraint
See images  - 
 While pressing the harness
adjustment button, pull
completely the two shoulder
harnesses of the enhanced
child restraint.
 Unlock the buckle of the
harnesses by pressing the red
button.
 Do not remove the Head
Support before the baby
sitting. 
 Infant insert is for childrens
protection. Children under
60cm are suitable to use the
infant insert. 
 Check that shoulder harness
straps are set at proper height.
 Place child into the infant
carrier module and lock the
buckle. 
 Tighten the shoulder
harnesses by pulling
adjustment webbing.
Installation
without base
See images  - 
DO NOT install this infant carrier
module on vehicle seats with Lap
Belts.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graco SnugEssentials i-Size at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graco SnugEssentials i-Size in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info