510607
34
Zoom out
Zoom in
Previous page
1/60
Next page
F
D
A

1. Test base for secure installation. See sections 9.0 and
10.0 for base installation, p. 30-33
A.
2. Push in B and rotate knobs C on both sides of child
restraint at the same time to unlock position.
3. Place child restraint on base in rear-facing position D.
4. Rotate knobs on both sides of child restraint to lock it
into base E. You will see lock symbols in windows on
side of base as shown H.
5. If you see the red ags up in the child restraint
seating area F and you see the unlock symbol I
then seat is not secured to base.
6. Check seat is secure by moving front to back and left
to right at the belt path G. Base should not move
more than 1 inch ( 2.54 cm). If belt loosens or
lengthens, repeat procedure.
NOTE: Make sure tether is stored. See “14.1 Tether
Storage”, p. 39. You can not use tether in rear-facing
mode.
NOTE: Bubble in level indicator must be fully
between the two lines J. Level indicator is for
rear-facing use only. See “17.0 Using Recline”, p. 44
11.0 REAR-FACING INSTALLATION
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graco Smart Seat at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graco Smart Seat in the language / languages: English as an attachment in your email.

The manual is 5,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info