768373
10
Zoom out
Zoom in
Previous page
1/104
Next page
10
WARNING
IMPORTANT, RETAIN FOR FUTURE REFERENCE:
READ CAREFULLY.
EN
ALL WARNINGS AND INSTRUCTIONS ON
THE PRODUCT ARE TRANSLATED IN THIS
INSTRUCTION MANUAL.
This product requires adult assembly.
WARNING: Ensure the Comfort Options sticker
is removed from the Electronics Module
and disposed of when the cot / playpen is
assembled, prior to its first use.
Always keep your child in view.
A folding cot / playpen is ready for use only
when the locking mechanisms are engaged.
Check carefully that they are fully engaged
before use.
WARNING: Ensure that the cot / playpen is
fully erected and all the locking mechanisms
are engaged before placing your child in this
cot / playpen.
Your Pack ’N Play, including side rails and
bottom pad, must be fully assembled prior to
use.
Top rail must be completely latched.
Centre hub must be locked.
Velcro straps.
WARNING: Do not use the cot/playpen
without the mattress base.
Always use the mattress base provided with
xings to the underside.
TO AVOID SUFFOCATION, DO NOT use extra
padding such as a water mattress, or pillows
inside the playard.
This travel cot is sold with a base hardcover
mattress specifically designed to avoid any
WARNING: Only use the mattress provided.
WARNING: Do not use more than one
mattress in the cot/playpen.
WARNING - Only use the mattress sold
with this cot/playpen, do not add a second
This product complies to EN 716-1:2017
+AC:2019 and EN16890: 2017.
This travel cot can also be used as a playpen.
WARNING: Always keep objects out of childs
reach.
Remove the accessory when child is able to
pull himself up in the playard.
Unlike cribs that have rigid sides, the Pack ’N
Play has flexible sides. As a result, the Pack'N
Play mattress is specially designed to prevent
suffocation.
The lowest mattress base position is the
safest and should always be used when the
baby is old enough to sit up. Discontinue
using the bassinet when the baby can sit,
kneel or pull itself up: typically at 6 months
old or 9 kg weight.
WARNING: Do not leave the child
unattended in the changing unit.
It is essential to remove the bassinet, and its
support tubes before using the cot / playpen
with the mattress in its lowest position.
Your playard/ bassinet, including side rails
and bottom pad, must be fully assembled
prior to use.
Centre hub must be locked.
To remove bassinet; remove mattress pad,
unhook 4 clips from side rails and 2 tubes.
Pack N Play’s main components are the
frame and the mattress:
All other parts are defined as accessories.
All accessories should be removed when
bassinet is not used.
WARNING: Do not place the cot / playpen /
changing unit close to an open fire or other
heat source. Be aware of the risk of open
fire and other sources of strong heat such
as electric bar fires, gas fires etc. in the near
vicinity.
Inspect the product for damaged hardware,
loose joints, missing parts or sharp edges.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graco Contour Electra at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graco Contour Electra in the language / languages: All languages as an attachment in your email.

The manual is 48,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info