768340

Graco Booster Basic Manual

14
Zoom out
Zoom in
Previous page
1/100
Next page
14
10
11
FAILURE TO USE booster seat in a manner appropriate for your
child’s size may increase the risk of serious injury or death.
Weight and Height Limits
To use this Graco booster seat, your child MUST meet ALL of the
following requirements:
With back support (approximately 3 to 12 years old) :
• weigh between 15-36 kg, and
• are between 96 and 150 cm in height, and
• the shoulder belt MUST lay across child’s shoulders in red zone as shown
in 12 and the lap portion is positioned low on the childs hips, and
• the child’s ears are below top of booster seat. If tops of ears are above top
of seat, your child is too large for the booster seat
Without back support (approximately 4 to 12 years old) :
• weigh between 15-36 kg, and
• are between 101 and 150 cm in height, and
• the shoulder belt MUST lay across child’s shoulders in red zone as shown
in 13 and the lap portion is positioned low on the childs hips, and
• when sitting on the booster seat, your child’s ears are below the top of the
vehicle seat cushion / head rest.
Your Graco booster seat can be used with or without the back support (on
certain models) as long as the above requirements are met.
UNSAFE Vehicle Seat Belt Systems
DO NOT USE ANY OF THE FOLLOWING VEHICLE BELT
SYSTEMS.
• NEVER use a lap-only belt.
• NEVER use a Passive Restraint Lap or Shoulder Belt Mounted on
Door
Assembling the booster seat
To adjust armrests, remove screw and press in button on side of base as
shown to raise or lower. Reinsert screw and tighten. CHECK to make
sure armrests are securely attached by pulling up on them.
Slip armrest covers (on certain models) onto armrests as shown.
Your Graco booster seat is now ready to use. See “Securing Child in
Vehicle with Shoulder Belt Positioning Clip”.
FOR MODELS with a back support continue on to 5.
Flip head support and lower back support over as shown.
Squeeze red adjustment button and slide two pieces together until they
snap into place.
CHECK to make sure two pieces are securely snapped together by pulling
on them.
Attach elastic strap as shown.
Flip seat over and insert the fabric from the head support underneath the
fabric on the lower back support as shown.
To make insertion of fabric easier, slide the upper and lower back pieces
apart by squeezing the red adjustment button.
Attach backrest to base. “U”-shaped hooks on bottom of backrest will
interlock with bars on base.
Make sure that no part of the seat covering interferes when attaching
backrest to the base.
Once backrest is securely attached to the base, push backrest up as shown.
Your Graco booster seat is now ready to use. See “Using your Graco
Booster Seat” and “Securing Your Child in Vehicle”.
1
2
3
4
5
6
7
8
9
12
13
14
15
GB
GB
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graco Booster Basic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graco Booster Basic in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 8,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info