768362
15
Zoom out
Zoom in
Previous page
1/84
Next page
15
12 13
34
35
European Standard
Your booster seat has been approved to European Standard ECE R44.04
Universal Group 2,3 15-36kg
An approved number is attached to the seat shell and must not be removed.
belts, approved to ECE Regulation No.16 or other equivalent standards.
GB
GB
Always keep this Owner’s Manual with the booster seat. Provisions are made
on the bottom of the seat shell.
WARNING
DO NOT INSTALL OR USE THIS BOOSTER SEAT UNTIL YOU
READ AND UNDERSTAND THE INSTRUCTIONS IN THIS
MANUAL AND IN YOUR VEHICLE OWNER’S MANUAL.
IT IS MOST IMPORTANT that the booster seat is correctly routed
with the lap portion of the belt across the red belt guides under the
armrests and the diagonal belt through the red shoulder belt guides.
Ensure the belt webbing is not twisted.
DO TAKE CARE to locate and install the booster seat so that it is not
liable to become trapped by a moveable seat or in a door of the vehicle.
FAILURE TO PROPERLY USE THIS BOOSTER SEAT
INCREASES THE RISK OF SERIOUS INJURY OR DEATH IN A
SHARP TURN, SUDDEN STOP OR CRASH.
DO NOT use alternative load-bearing points not shown in these
instructions.
NEVER LEAVE YOUR CHILD UNATTENDED.
GB
GB
e vehicle seat belt, holding the child restraint to the vehicle,
should be tight.
EN
14 15
WARNING
NEVER LEAVE LUGGAGE or other objects unsecured in a
vehicle, they are liable to cause injuries in the event of a collision.
REPLACE THE BOOSTER SEAT AFTER AN ACCIDENT OF
ANY KIND. An accident can cause damage to the booster seat that
you cannot see.
DO NOT MODIFY YOUR BOOSTER SEAT or use any
accessories or parts supplied by other manufacturers.
recommended by the manufacturer, because the cover constitutes an
integral part of the restraint performance. See your retailer for Graco
replacement parts only.
Care and Maintenance
Metal and plastic parts: clean with mild soap and cool water. No
bleach or detergents.
FROM TIME TO TIME CHECK YOUR BOOSTER SEAT for worn
parts, torn material and stitching. If damage is found, DO NOT try to
modify the booster seat. Replace the booster seat.
DO NOT USE BOOSTER SEAT without its cover.
Assembling the booster seat
Flip head support and lower back support over as shown.
Squeeze red adjustment button and slide two pieces together until they
snap into place.
CHECK to make sure two pieces are securely snapped together by pulling
on them.
Attach elastic strap as shown.
Flip seat over and insert the fabric from the head support underneath the
fabric on the lower back support as shown.
To make insertion of fabric easier, slide the upper and lower back pieces
apart by squeezing the red adjustment button.
Attach backrest to base. “U”-shaped hooks on bottom of backrest will
interlock with bars on base.
Make sure that no part of the seat covering interferes when attaching
backrest to the base.
Once backrest is securely attached to the base, push backrest up as shown.
Your Graco booster seat is now ready to use. See “Using your Graco
Booster Seat” and “Securing Your Child in Vehicle”.
1
2
3
5
6
7
GB
GB
4
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graco Affix at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graco Affix in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 3,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info