657450
28
Zoom out
Zoom in
Previous page
1/40
Next page
Page | 70 GRACE MX Manual 2013
As the tension may vary slightly along the belt, this procedure should be carried out on a belt
that is gradually being moved on.
To do this, turn the pedal crank one rotation in
each case and repeat the measurement process
a few times.
If the belt tension is too high or too low,
continue to adjust it until the measurement
result corresponds to the specification.
Tighten the four (6 mm) Allen screws of the right and left belt tensioners on the dropouts.
Rotate the crank 10 15 times backwards and forwards and observe the alignment of the
belt in the process. While you are doing so, the belt should only slightly touch the lateral
stop (flange) of the rear sprocket or leave a gap of not more than approx. 1 mm. A consistent
gap of 0.5 mm is ideal.
Wrong
Tightening the axle adjustment screw on the
dropouts on the drive side or loosening it on the
opposite side will guide the belt to be aligned
further in the direction of the lateral stop
(flange) of the rear sprocket.
Adjust the rear wheel, so that the belt is properly
aligned as it moves.
Right
Turn the crank again, check the alignment of the
belt and reset it, if necessary. Repeat this step
until the alignment of the belt is set correctly.
In the process, always adhere to the required
belt tension.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grace MX 2013 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grace MX 2013 in the language / languages: English as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grace MX 2013

Grace MX 2013 User Manual - German - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info