642083
47
Zoom out
Zoom in
Previous page
1/72
Next page
47
during the baking process. If the green power LED illuminates, this indicates that the
device is reheating to maintain a constant temperature.
7. After approx. 5–6 minutes open the device to check whether the waf es have already
been baked to perfection or whether they need to be baked longer.
8. When the waf es are done, use wooden or plastic kitchen utensils to remove them to
prevent damage to the coating.
9. If you do not plan to bake any other waf es, pull the mains plug out of the socket and
let the device cool off completely before you remove and clean the plates and store
them together with the device.
Flat grill plates
These plates can be used to prepare pancakes, eggs, bacon and sausages, etc.
1. Insert the at grill plates as shown in the ‘Inserting and exchanging plates’ chapter.
2. The appliance must be connected only to properly installed mains sockets. The red
control light illuminates as soon as the appliance is connected to a mains socket.
3. The appliance now needs to pre-heat. Keep the appliance closed while it is heating
up. The appliance takes around 3–5 minutes to pre-heat, and is ready when the
green control light illuminates.
4. When the green power LED illuminates and the pre-heating process has ended,
release the latch and open the device.
5. Now place the food you want to cook on the bottom grill plate. You can prepare food
either with the grill open, or closed. Use only wooden or plastic kitchen utensils to
remove your food to avoid damaging the coating.
6. When closing the grill, ensure that the locking catch clicks fully into place. When
grilling, the green control light may switch off and on. If the green light comes on, it
means that the appliance is re-heating in order to maintain a constant temperature.
7. Please note that cooking times need to be extended if grilling with the appliance
open.
8. If you do not want to make any more dishes, remove the plug from the socket and
leave the appliance to cool down completely before removing the plates, cleaning
them and storing them with the appliance.
Omelette plates
Inserting these plates allows you to make delicious omelettes.
1. Insert the omelette plates as shown in the ‘Inserting and exchanging plates’ chapter.
2. The appliance must be connected only to properly installed mains sockets. The red
control light illuminates as soon as the appliance is connected to a mains socket.
3. The appliance now needs to pre-heat. Keep the appliance closed while it is heating
up. The appliance takes around 3–5 minutes to pre-heat, and is ready when the
green control light illuminates.
4. When the green power LED illuminates and the pre-heating process has ended,
release the latch and open the device.
5. Now pour your egg mixture onto the bottom omelette plate and close the appliance.
Make sure that you do not over ll over ll the omelette plate to prevent leakage.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gourmetmaxx Z 08995 - SW 072B Vario Chef 6in1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gourmetmaxx Z 08995 - SW 072B Vario Chef 6in1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info