562307
17
Zoom out
Zoom in
Previous page
1/40
Next page
17
Use
ATTENTION!
Make sure that the rotary switch for setting the speed levels is in the 0 position be-
fore you connect the device to the mains.
Do not switch on the device as long as the tilting mixer head is in an upright position.
Never operate the device without food. This might result in the device overheating
or damage to the motor.
Danger of injury due to rotating device parts! Keep body parts, hair, jewellery, and
clothing away from the device during use so that nothing can get caught in rotating
device parts.
Caution – danger of scalding! Do not use any hot food in the device as it could spurt
out during use.
Do not use any additional accessories. Only use accessories supplied by the manu-
facturer.
Do not over ll the mixing bowl. This might result in the device overheating or dam-
age to the motor.
The device is equipped with overload protection that deactivates the device when
it overloads. If this occurs, immediately disconnect the plug from the socket and let
the device cool off for approximately 10 minutes. Afterwards, the device is ready for
use again.
Always assemble the device in full before you connect it to the mains power.
Do not leave the device unattended during operation!
During operation, keep children and animals away from the device in order to avoid
injury or damage to materials and the device itself!
Remove the mains plug from the plug socket before each exchange of the inserts.
Make sure that you do not use the inserts mixed up. Only either the dough hooks or
the stirrer inserts may be used at any one time.
1. Place the device on a dry, even and rm surface with suf cient clearance around it.
2. Place the ingredients in the mixing bowl in accordance with your recipe.
3. Press the release button and attach the mixer head.
4. Insert the mixing bowl into the basic device. Rotate the mixing bowl clockwise to-
wards the closed lock symbol
(on the basic device). Hold the turntable rmly as
you do so.
5. Choose the inserts you want (see the “Accessories” chapter).
6. Slide the inserts into the receiving socket on the mixer head. Note the markings (L
and R) on the inserts and the receiving socket. The insert with the marking R goes in
the receiving socket with the marking R. The same applies to the insert and receiv-
ing socket with the marking L.
7. Turn the insert to the right until the locking lug ts in the recess provided in the re-
ceiving socket. The insert must be heard to engage in place.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gourmetmaxx Z 05291 - XJ-13406 Classico at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gourmetmaxx Z 05291 - XJ-13406 Classico in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info