562306
17
Zoom out
Zoom in
Previous page
1/36
Next page
17
2. Place the device on a dry, heat-resistant and level surface at a suf cient distance to ammable
objects. If necessary, place a heat-resistant base under the device.
3. Open the lid and if applicable, grease the baking surfaces slightly before baking for the rst
time.
4. Heat up the device: Connect it to a properly installed socket. The red power LED will illumi-
nate as soon as the device has been connected to a socket. The green power LED indicates
that the device has reached the operating temperature, Always keep the device closed when
it is heating up.
5. The device reaches its operating temperature after approximately 3 4 minutes when the
green power LED turns on. Please note: The green power LED turns off during further opera-
tion and then turns back on at regular intervals. This is not a malfunction, but simply indicates
that the device is heating up again or interrupting the heating process in order to maintain a
constant operating temperature.
6. Fold up the lid once the device has reached its operating temperature.
7. Place the prepared batter in the moulds in the lower baking surface. The moulds in the lower
baking surface should be adequately lled. The exact amount of batter that needs to be lled
in the baking moulds depends on the consistency of the batter and can best be determined
by performing a test baking cycle. Don't be discouraged if the rst baking attempt doesn't
turn out perfect!
8. Carefully close the lid and let the cupcakes bake for approximately 5 – 8 minutes.
9. Open the lid to check whether the cupcakes have been baked according to your wishes or
whether they need to be baked more.
10. When the cupcakes are done, use wooden or plastic kitchen utensils to carefully remove
them and place them on a suitable tray so they can cool.
11. Fill the device again in order to bake more cupcakes.
12. If you do not want to bake more cupcakes, pull the plug out of the socket and let the device
cool off completely in an open state before you clean and stow it (see chapter “Cleaning and
storage”).
Decorating cupcakes
For best results, let the cupcakes cool off before you decorate them.
The cupcakes can be eaten pure or they can be coated with chocolate or another
cake icing.
• You can ll or top the cupcakes with different kinds of creams, e.g. based on cream
cheese or mascarpone.
1. Prepare the icing or cream.
2. Prepare the icing bag and select the adapter you would like to use.
3. Place the cupcakes in the enclosed paper cups.
4. Now use the icing bag to top a cupcake with icing or ll or top it with cream.
Let the icing or cream dry brie y before you decorate the cupcake in the next step.
Let your imagination decide what other decorations you need: For example, try adding colour-
ed or chocolate sprinkles for more decoration.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gourmetmaxx Z 05290 - TX-103M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gourmetmaxx Z 05290 - TX-103M in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info