562302
16
Zoom out
Zoom in
Previous page
1/35
Next page
16
Place the device in a location where there is no risk of falling or getting pulled down
by the cord! Children and animals must be under supervision to ensure that they do
not play with the device!
Do not slide the device across the surface it is standing on in order to avoid abrasion
of the feet.
Do not use metal kitchen utensils or other sharp edged objects to remove baked
goods in order to not damage the non-stick coat of the baking surfaces!
Make sure that you do not over ll the device! Excess batter may ow out on the
sides of the device. Furthermore, the device should generally be easy to close. Do
not forcefully attempt to close the device!
The baking surfaces have a non-stick coat. However, for best results, we re-
commend that you grease them slightly with cooking oil or fat before baking for
the rst time. Do not use cooking spray as it may damage the non-stick coat!
Baking with the multi-baker...
1. Prepare the batter according to your wishes. You can nd a recipe suggestions in
the chapter “Basic batter recipe”.
2. Insert a pair of plates of your choice in the device (see chapter “Inserting/changing
the baking surfaces”).
3. Place the device on a dry, heat-resistant and level surface at a suf cient distance
to ammable objects. If necessary, place a heat-resistant base under the device.
4. Open the lid and if applicable, grease the baking surfaces slightly before baking for
the rst time.
5. Heat up the device: Connect it to a properly installed socket. Both control lights will
illuminate as soon as the device has been connected to a socket. The device will
immediately begin to heat up. Always keep the device closed when it is heating up.
6. The device reaches its operating temperature after approximately 3 4 minutes
when control light I turns off.
7. Fold up the lid once the device has reached its operating temperature.
8. Place the prepared batter in the moulds in the lower baking surface. The moulds in
the lower baking surface should be adequately lled. The exact amount of batter that
needs to be lled in the baking moulds depends on the consistency of the batter and
can best be determined by performing a test baking cycle. Don't be discouraged if
the rst baking attempt doesn't turn out perfect!
9. Carefully close the cover and let the baked goods bake for approximately 6 – 8 mi-
nutes. Make sure that the locking latch on the cover is locked in place.
10. Open the cover to check whether the baked goods are already baked according to
your wishes or whether they need to be baked more.
11. When the baked goods are done, use wooden or plastic kitchen utensils to carefully
remove them and place them e. g. on a rack so they can cool.
12. Fill the device again to prepare more baked goods.
13. If you do not want to prepare more baked goods, pull the plug out of the socket and
let the device cool off completely while open before you clean and stow it (see chap-
ter “Cleaning and storage”).
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gourmetmaxx Z 04894 - SW-238 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gourmetmaxx Z 04894 - SW-238 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info