642086
17
Zoom out
Zoom in
Previous page
1/44
Next page
17
Before Initial Use
Unpack all parts and check the items supplied for completeness (see the "Items
Supplied and Device Overview" chapter) and transport damage. If you nd any damage
to the components, do not use them (!), but contact the customer service department.
Clean the device and all accessories (see the "Cleaning and Storage" chapter).
Use
CAUTION!
The blades are sharp! Be careful when handling the blade in order to prevent any
cut injuries.
Never reach into the mixing container when the device is connected to the mains
power or is switched on.
Danger of injury due to rotating device parts! Keep clothing, jewellery, hair, hands
and other body parts away from the device so that nothing can get caught in rotating
device parts.
Do not use the mixing container without the lid!
Never use the stirrer without the suitable insert in the mixing container lid as other-
wise it could become caught in the blades.
Press the AUS (off) button to switch off the device and always pull the mains plug
out of the plug socket before you remove and / or attach the mixing container or the
grinder attachment.
Do not leave the device unattended when it is switched on.
Make sure that the device remains stable during operation.
The device may not be moved or transported while it is switched on.
Never operate the device when it is empty. The mixing container must be lled
with liquid at least up to the bottom marking on the container (0.25 L), the grinder
attachment should be at least 1/3 lled with foodstuffs.
Do not over ll the containers. The mixing container must be lled no higher than the
1.5 litre mark, the grinder attachment must be lled no higher than just below the
edge of the container.
Never ll the device with boiling-hot food or liquids! The contents must not be hotter
than 50°C.
Always keep the lid of the mixing container closed while preparing food. To add in-
gredients during operation, the insert in the middle of the mixing container lid can be
removed.
Do not use the device for longer than 1 minute without interruption to prevent
overheating. The device switches off automatically if it overheats. In this case, let the
device cool down for a few minutes before you use it again.
1. Place the motor unit on a dry, even and rm surface. Press the suction feet rmly
onto the surface.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gourmetmaxx Z 04216 - PN 2816P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gourmetmaxx Z 04216 - PN 2816P in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info