642091
20
Zoom out
Zoom in
Previous page
1/44
Next page
20
Setting the timer
You have the option of selecting a cooking time, after which the hotplate automatically deactivates
(switches to standby mode).
1. Once you have selected the power level or temperature you want, push the TIMER button.
A signal sound will be emitted and 00:00 will appear on the display. The hour display will
blink.
2. Set the desired number of hours (0–4 hours) with the  / buttons.
3. You can switch to the minute display by pushing the TIMER button again. The minute
display will blink.
4. Set the desired number of minutes (0–59 minutes) with the  / buttons.
Please note: If the number of hours has been set to 4, then the number of minutes cannot
be set.
5. Once you have set the number of minutes, you do not have to push any other button. The
timer will automatically activate after approximately 5 seconds and the TIMER control light
will illuminate. The display will show the last setting (power level or temperature).
To show the remaining time on the display, push the TIMER button again. After approximately
5 seconds, the display will automatically switch to the previous readout (power level or
temperature).
6. Once the set time has elapsed, a signal will sound and the device will automatically switch
to standby mode.
In timer mode, you can adjust the cooking duration, power level and temperature
at any time without affecting the other settings as a result. For this, push the
corresponding button (POWER / TEMP / TIMER) and then or .
Quickly push the TIMER button three times in a row to prematurely abort the
timer. The TIMER control light will turn off.
Cleaning and storage
ATTENTION!
Each time before cleaning the device, pull the plug out of the socket. The device must have
cooled off completely before you clean and / or store it.
The device is not suitable for the dishwasher.
Do not spray any cleaners directly on the device.
Never submerge the device, the mains cord or the mains plug in water or other liquids. The
risk of electrocution exists.
Do not use any scouring or abrasive cleaners, rough sponges or knives to clean the device.
They could damage the surface.
1. Ensure that the device has cooled off completely and that the mains plug has been
disconnected!
02889_DE-GB-FR-NL_V0.indb 20 10.06.2013 11:29:53
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gourmetmaxx Z 02889 - HP 606 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gourmetmaxx Z 02889 - HP 606 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info