703179

Gourmetmaxx WK-1701-6 - 06885 Manual

17
Zoom out
Zoom in
Previous page
1/36
Next page
17 EN
Before fi rst use
• Remove any protective foils and stickers from the device. Never remove the type
plate or any warnings!
• Clean the accessories before using them for the fi rst time as they may contain man-
ufacturing residues. Follow the instructions in “Cleaning and storage”.
Usage
PLEASE NOTE THE FOLLOWING!
■ Only use the device if it has been correctly assembled!
■ Risk of damage due to unforeseen events!
– Ensure that the unit is stable during operation. Hold the cutting container with one
hand and the motor unit with the other hand.
– When using the cutting container, do not move the device during use. Always
unplug the mains plug from the socket and allow the motor to come to a complete
stop before transporting the device.
■ Use the device for a maximum of 1 minute without interruption. A cooling time of
2 minutes must subsequently be observed.
■ Always disconnect the mains plug from the socket before changing accessories.
Using the cutting container with blades
1. Place the cutting container (6) on a dry, level and fi rm surface.
2. Insert the motor shaft with attached blades (5) into the holder in the cutting container.
Make sure it is seated correctly.
3. Fill the food to be shredded into the cutting container. PLEASE NOTE THE FOL-
LOWING! Do not overfi ll the cutting container! Make sure that the maximum
fi lling quantity (MAX mark) is not exceeded.
4. Place the protective cover (7) on the cutting container and turn it clockwise to lock it
in place. The protective cover must engage noticeably.
5. Place the motor unit (8) on the protective cover and turn it clockwise to lock it in
place. The motor unit must engage noticeably.
6. Connect the mains plug to an socket that is properly installed and conforms to the
specifi cations of the device.
7. Press and hold the L (1) or H (9) button to run the device at low or high speed respec-
tively. The motor shaft rotates and the blades shred the food in the cutting container.
8. Release the L or H button when the food has been crushed. The motor shaft comes
to a standstill.
9. Disconnect the mains plug from the socket.
10. Turn the protective cover counter-clockwise to release it from the cutting container
and remove it together with the motor unit.
11. Carefully remove the motor shaft from the cutting container. PLEASE NOTE THE
FOLLOWING! Do not touch the blades!
12. Remove the crushed food from the cutting container.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gourmetmaxx WK-1701-6 - 06885 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gourmetmaxx WK-1701-6 - 06885 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info