703282
18
Zoom out
Zoom in
Previous page
1/40
Next page
EN 18
Only standard commercial sugar is suitable for making candy oss. Do not
use glucose or a similar type of sugar.
Only use suitable skewers made of wood to pick up the candy oss. Skewers
made of other materials are not suitable.
1. Place the device on a dry, level, rm and heat-resistant surface. Press the suction
feet (5) rmly onto the surface.
2. Connect the device to a mains socket that has been properly installed. Make sure
that the mains cable does not present a trip hazard.
3. Switch the device on by moving the On/Off switch (7) to Position I (On). The device
heats up and the sugar container (3) begins to rotate. Allow the device to preheat for
5 minutes without any contents.
4. Switch the device off by moving the On/Off switch (7) to Position 0 (Off). Wait until the
sugar container (3) comes to a standstill.
5. Use the measuring spoon that is also supplied to ll the
sugar container (3) with sugar.
Tip: Break up colourful little sweets and add them to the
sugar. This will produce colourful candy oss with different
avours. ATTENTION: Do not place any whole sweets
or sweets with llings into the device!
6. Switch the device on by moving the On/Off switch (7) to Position I (On). The device
heats up and the sugar container (3) begins to rotate. Strands of sugar begin to form.
7. Grab a wooden skewer and hold it vertically in the bowl (9). Make sure that you do
not touch the sugar container (3).
8. Move the wooden skewer in a circular motion around the sugar container (3). Twist it
between your ngers as you do this.
As soon as a little candy oss has stuck to the wooden skewer, hold it at a slight
angle. Keep twisting the wooden skewer between your ngers. This makes it
easier to coil up the strands of sugar.
9. Keep repeating step 8 until the desired quantity of candy oss is on the wooden
skewer.
10. Switch the device off by moving the On/Off switch (7) to Position 0 (Off).
11. Remove the plug from the socket.
If you want to add more sugar, please note the following:
Switch off the device and wait until the sugar container (3) has come to a standstill
before you add any more sugar. This is important for ensuring that no sugar gets
onto the heat pipes (8). Sugar residues on the heat pipes (8) may cause the
device to overheat.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gourmetmaxx SBL-2807 - Z07329 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gourmetmaxx SBL-2807 - Z07329 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info