703115
4
Zoom out
Zoom in
Previous page
1/8
Next page
EN Instructions
Customer Service / Importer:
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Deutschland •
+49 38851 314650 *)
*) Calls to German landlines are subject to charges. The cost varies depending on the service provider.
All rights reserved.
4
1. Press together the battery
compartment cover on both
sides and pull it off back-
wards.
2. Insert two batteries (1.5 V,
AA type). Pay attention to the
correct polarity (+
/
–).
3. Slide the battery compartment cover back onto the battery
compartment (1). You must hear and feel it engage.
Use
The can opener cuts on the seam on the can lid. This
ensures that no sharp cutting edges are produced!
1. Place the can opener onto the
can from above. The edge of the
can must be in the gap between
the cutting blade and the guide
wheel (5) (see illustration). The
cutting blade (4) does not work if it
is not placed correctly on the edge
of the can.
2. Press the On / Off button (6). The motor starts to operate
and the cutting blade extends. The can opener automati-
cally cuts open the lid. It is not necessary to guide the can
opener with your hand.
3. Once the cutting blade has moved all the way round the
edge of the can, the motor can be switched off. To do this,
press the On / Off button again. The cutting blade moves
back to its starting position.
4. Pull the can opener off forwards and remove the lid with the
aid of the magnet (2).
Other Functions
Prying open can lids
Opening bottles with crown caps
Opening jars
Opening cans with a ring pull
Cleaning and Storage
PLEASE NOTE!
Remove the batteries from the product before cleaning the
cutting blade.
Do not use any corrosive or abrasive cleaning agents or
cleaning pads to clean the product.
The product is not dishwasher-safe!
Clean the cutting blade and the housing with a damp cloth
and mild washing-up liquid if necessary.
Then dry all components with a soft cloth.
Store the product in a dry, clean place that is not accessible
to children and animals.
Troubleshooting
If the product does not work properly, rst check whether you
are able to rectify the problem yourself. If the problem cannot
be solved with the steps that are listed, contact the customer
service department.
Do not attempt to repair a electrical product your-
self!
Problem Possible cause / solution
The product
only works
slowly or not
at all.
Have batteries been inserted? Insert
two batteries (1.5 V, AA type) into the
product.
Are the batteries which are inserted
dead? Change the batteries.
Is the cutting blade (4) seated correctly
on the edge of the can? Correct the t.
The product is
blocked.
Press the On / Off button (6) so that
the cutting blade moves to the starting
position and is released.
Technical Data
Article number: 00568 (grey) / 01461 (limegreen) /
02823 (pink) / 02972 (black)
Model number: KC126
Power supply: 3 V DC (2 x 1.5 V battery, AA type)
ID of instructions: Z 00568_01461_02823_02972 M DS V3 1118
Disposal
Dispose of the packaging material in an environmen-
tally friendly manner and take it to a recycling centre.
This product is governed by the European Directive
2012/19/EU on waste electrical and electronic equip-
ment (WEEE). Do not dispose of the product as nor-
mal domestic waste, but rather in an environmentally
friendly manner via an of cially approved waste dis-
posal company.
The batteries should be removed prior to disposal of the
product and disposed of separately from the product at
a suitable collection point.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gourmetmaxx KC126 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gourmetmaxx KC126 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info