571671
41
Zoom out
Zoom in
Previous page
1/44
Next page
GOSSEN-METRAWATT GMBH 41
Mwx, Gwx
MW: slechtste meetwaarde
(vanwege gebruiksfout gecorrigeerd)
GW: grenswaarde
Het aantal en de betekenis van de meetwaarden is afhankelijk
van het aantal aangegeven bits bij de enkelvoudige meting
BB en bij de tweede byte de klassificatie DD.
BB.0=1 2 waarden;
beschermingsleidingsweerstand: MW, GW
BB.0=1 + DD.2=1
4 waarden; beschermingsleidingsweerstand:
MW, GW, verschil van MW, differentiële GW
BB.1=1 4 waarden; isolatieweerstand: MW, GW;
meetspanning: MW, GW
BB.2=1 2 waarden; vervangende lekstroom: MW, GW
BB.3=1 2 waarden; sondestroom: MW, GW
BB.4=1 4 waarden; voedingsspanning bij SK III:
MW-AC, GW-AC, MW-DC, GW-DC
BB.5=1 2 waarden; verschilstroom: MW, GW
BB.6=1 functietest uitgevoerd
$CS Checksum: testsom in ASCIIHEX
via de ASCII-waarde van ieder teken
van de antwoordtekenstring,
waarbij een overdracht via FF afgebroken wordt.
Voorbeeld
PRO? levert als antwoord:
Protokolx = TEST;0701208005060000;0.077;<0.400;>310.0;
>.0500;0539;>0500;00.17;>0000$61
Protokolx = Geräte-ID;BBCCDDEEFFGGHHII;MW1;GW1;
MW2;GW2;MW3;GW3;MW4;GW4;$CS
Protokol van het apparaat op adres x
(voorheen niet geadresseerd apparaat)
Positie ASCIIHEX Binaire weergave Betekenis
BB 07 0000 0111 Rsl, Riso en Iea gemeten
CC 01 0000 0001 Beschermingsklasse I
DD 20 0010 0000
Visuele test uitgevoerd,
geen Iea-meting nodig
EE 80 1000 0000
Alle enkelvoudige metingen succesvol
uitgevoerd, totale test niet succesvol
FF 05 0000 0101
De visuele test vanwege beschermingsleiding en
behuizing niet succesvol, functietest succesvol uit-
gevoerd is niet mogelijk omdat BB.5=0
GG 06 0000 0110
Testteller (wordt op dit moment
geen waarde voor bepaald)
HH 00 0000 0000 op dit moment onbenut
I I 00 0000 0000 op dit moment onbenut
MW1 0.077 Meetwaarde weerstand beschermingsleiding Rsl in
GW1 0.400 Grenswaarde weerstandbeschermingsleiding Rsl in
MW2 > 310.0 Grenswaarde weerstand beschermingsleiding Riso in M
GW2 > 0.500 Meetwaarde isolatieweerstand Riso in M
MW3 0539
Meetwaarde van de spanning in V,
waarmee de isolatieweerstand gemeten werd
GW3 > 0500 Nominale spanning voor het meten van de isolatieweerstand in V
MW4 00.17 Meetwaarde van de vervangende lekstroom Iea in mA
GW4 > 0000 Grenswaarde Iea in mA vervangen door ---- omdat DD.5=1
$CS 61
ASCHEX(P)+ASCHEX(r)+ASCHEX(o)+... +ASCHEX($) =
50H+72H+6FH+...+24H
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt SECUTEST 0701 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt SECUTEST 0701 in the language / languages: Dutch as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info