Manual Gossen Metrawatt SECUSTAR FM (page 67 of 160) (English)

590771

Zoom out

Zoom in

1/160

GMC-I Messtechnik GmbH 67

Test: Connection Tests – On Test – Safety Class Detection

Probe Test (probe connection test)

Testing is conducted to determine whether or not

the test probe is plugged into sockets 1 and 2, i.e.

whether or not a (low impedance) connection exists between the

two connector plugs.

Probe plugged in í message: OK

Probe not plugged in í message: Error

Safety Class Test

– DUT safety class detection

This test determines whether or not a safety class I device

(earthing contact plug) is plugged into the test socket. Resistance

between the protective conductor terminal at the mains plug and

the protective conductor contact at the test socket is measured

to this end:

R < 0.5 : protective conductor exists í SC1

R > 5 : no protective conductor í SC2

Note: SC2 also appears at the display if no DUT is connected, or

if the protective conductor at the plug is only contacted at one

side.

Sequence

Ð Select the test: Test softkey.

Ð Select the type of test: Measurement type softkey.

Ð Connect the DUT to the test socket, or connect the probe.

Ð Start the test: ONSTART key.

Testing is ended automatically.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt SECUSTAR FM in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gossen Metrawatt SECUSTAR FM Manual

Product: