590771

Gossen Metrawatt SECUSTAR FM Manual

43
Zoom out
Zoom in
Previous page
1/160
Next page
GMC-I Messtechnik GmbH 43
R
PE
PE Resistance
Test Socket
DUT mains plug connected to the test socket
Probe connected to sockets 1 and 2
Extension Cable
Extension cable plug connected to the test socket
Probe connected to sockets 1 and 2
Probe connected to protective conductor contact
of the extension cable socket coupling
Sequence – DUT Connected to Test Socket
Ð Select the test: R PE softkey.
Ð Connect the DUT to the test socket.
Ð
Select measuring range, protective conductor test current, frequency
and measurement duration.
Ð Select test socket or extension cable* as the type of connection
via measurement type.
Ð Start the test: Press the ONSTART key.
Ð After each reconnection to the mains, and as soon as the first
test is started, a mains connection test is executed (see
section 4.1.1).
Ð Contact one of the conductive parts of the housing which is
connected to the protective conductor with the probe.
During measurement, the connector cable must only be moved to
the extent it is accessible during repair, modification or testing.
If a change in resistance occurs during the manual test step of the
continuity test, it must be assumed that the protective conductor
is damaged, or that one of the connector contacts is no longer in
flawless condition.
Ð Measured values are displayed.
Ð End the test: Press the ONSTART key.
Ð Read the measured value and compare it with the table of
allowable limit values.
* Special Case, Connection of Extension Cables
The extension cable plug is inserted into the test socket, and the
probe is connected to the protective conductor contact in the
coupling socket.
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt SECUSTAR FM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt SECUSTAR FM in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info