590771

Gossen Metrawatt SECUSTAR FM Manual

26
Zoom out
Zoom in
Previous page
1/160
Next page
26 GMC-I Messtechnik GmbH
Initial Start-Up – Setup
Changing Your Own Password (user status)
The old password must first be entered correctly before it can be
changed. The new password can then by typed in. In order to
acknowledge the new password, it must be entered a second
time and acknowledged by tapping OK.
The changed password is not updated to the test system until it
has been saved.
Deleting Users (admin status)
In order to delete users and their data, activate the checkbox to
the left of the respective user and tap the delete symbol.
Note
Users which have been added to the CF card are updated to
the test system during import.
4.10.2 Roles – Assigning Authority
The user with administrator authority (admin status) is able to
assign authority allowing users to enter new designations and
manufacturers in the “Roles” setup menu. This authority is not
assigned to individual persons (i.e. test person names), but rather
to a group, for example standard users.
If the respective user of a given group (user status) does not have
this authority, he is only able to select designations and manufac-
turers from a list.
4.10.3 Configuring the Display
Calibrating the Touch Screen
Recalibration of the touch screen becomes necessary when, for
example, the symbols have to be tapped at the side instead of in
the middle in order to activate the various functions and menus.
The calibration menu appears automatically after a reset, after the
batteries have been replaced and if the system has been
switched off for a period of longer than 2 hours.
Three crosshairs, one at the top left and one at the bottom right,
must be tapped with the wand, one after the other, in order to
calibrate the touch screen. The procedure is then concluded by
tapping OK.
Adjusting Brightness and Contrast
Brightness (0 ... 4 ... 7) and contrast (0 ... 100 ... 1xx) are adjusted
either with sliders or numerically. New values are only activated if
acknowledged by tapping the OK button within a given period of
time which is specified by means of a count-down timer (7 to 0
seconds).
Note
From device variant SECUSTAR FM+ onwards, it is no longer
possible to adjust the contrast.
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt SECUSTAR FM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt SECUSTAR FM in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info