590771
19
Zoom out
Zoom in
Previous page
1/160
Next page
GMC-I Messtechnik GmbH 19
Initial Start-Up – Setup
Rechargeable battery (charging process)
In contrast to conventional, commercially available storage bat-
tery-operated instruments, an inserted battery set is not re-
charged until it falls below a fixed threshold.
This is due to the fact that the SECUSTAR FM+/SECULIFE SB may not be
permanently recharged while being changed between different types of mains
connections. This would corrupt the rechargeable battery set within a short
period of time.
The charging concept with the above-mentioned fixed threshold, however,
ensures that the battery is only recharged if it is almost entirely depleted.
When the SECUSTAR FM+/SECULIFE SB is supplied with mains power
for more than 2 hours without interruption (in on or off state), the battery
charging process is launched automatically, independent of the battery
charging condition. A battery which is supplied overnight with mains
power, is therefore always fully charged.
Of course, it is also possible to start the fast charging process via
the express charge button in the setup menu at any time
(see section 4.10.8).
4.3 Switching the Test System On
Prerequisite for switching the test system on:
The test system is connect to the mains with the mains cable
(see section 4.1).
or
A charged battery pack is installed (see section 4.2).
Ð Press and hold the ONSTART key for approximately 3
seconds . The initial window appears.
Initial Window
The initial window
shown at the right
appears in the event
of:
•Reset
Battery change
Test system has
been switched off
for more than 2
hours.
Note
The touch screen must be calibrated from time to time before
the login menu appears (see section 4.10.3 on page 26).
4.4 Login
Login As Default User
. . .” appears next to
User name.
Ð Ignore the password
prompt. Tap the Login
key
Login With Password
(user status)
Ð Select a test person
from the list which appears after clicking the drop-down arrow.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt SECUSTAR FM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt SECUSTAR FM in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info