Manual Gossen Metrawatt SECULIFE SR (page 10 of 40) (English)

590770

Zoom out

Zoom in

1/40

10 GMC-I Messtechnik GmbH

Initial Start-Up – Setup

4 Initial Start-Up

4.1 Connection to the Mains (90 to 240 V, 50 to 400 Hz)

➭ Connect the mains plug at the measuring instrument to the

mains power outlet.

4.1.1 Automatic Recognition of Mains Connection Errors

The measuring instrument’s protective conductor connection is

tested each time the start-stop key is pressed.

If a voltage of greater than 25 V is detected between the

protective conductor and the finger contact, no measurements

are possible. Disconnect the measuring instrument from the

mains immediately in the event of a mains connection error, and

arrange for the error to be corrected!

Note

Voltage at the mains protective conductor may cause

erroneous measured values during the measurement of

leakage current.

4.2 Switching the Measuring Instrument On

Initial Window

The initial window shown at the right ap-

pears in the event of mains connection.

4.3 Configuring Device Parameters – Setup Menu

All of the settings which are required for operation of the

measuring instrument can be entered in the setup menu.

Selecting Nominal Line Voltage ULN

Measured values acquired by

means of leakage current mea-

surement are normalized to the

selected ULN voltage value. Line

voltage parameter ULN (100, 110,

115, 117, 120, 127, 220, 230,

240 or 250 V) can be selected

with the ↑↓ keys, and adjusted

with the +/– keys. The voltage

value selected here is generated

by the measuring instrument for alternative measurement.

Setting Nominal Frequency

The frequency selected here is generated by the measuring in-

strument for alternative measurement of leakage current. Nominal

line frequency parameter F (50 or 60 Hz) can be selected with the

↑↓ keys, and adjusted with the +/– keys. This setting is irrelevant

for direct measurement and differential current measurement.

Setting Brightness and Contrast

Brightness (1 ...

... 100) and contrast (0 ...

... 63) for the LCD panel

can be selected with the

↑↓

keys, and adjusted with the +/– keys.

Activating Device Parameters

Changed values are permanently activated after acknowledging with

the key. The display is then switched to the main menu. If the

setup menu is exited with the ESC key, the changed values only re-

main active until supply power to the instrument is interrupted.

Function Test

For testing the keys, LCD segments and the acoustic warning sig-

nal.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt SECULIFE SR in the language / languages: English as an attachment in your email.

The manual is 0,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gossen Metrawatt SECULIFE SR Manual

Product: