590781

Gossen Metrawatt SECULIFE IF plus Manual

18
Zoom out
Zoom in
Previous page
1/24
Next page
SECULIFE IF+
THEORY OF OPERATIONS
Infrared sensors are used to detect the presence of water in the chamber. There are two sensors in
each chamber. As water is detected at the bottom sensor, an internal timer is started. The timer runs
internally in hundredths of seconds but is only displayed in tenths of seconds. The test automatically
ends when water is detected at the top sensor. A buzzer will sound to indicate that the test is complete.
The buzzer can be programmed to sound for a specific number of beeps (0-15 beeps, see setup).
The flow rate is calculated based on the volume of the chamber and the time required to fill the tube.
The volume of the chamber is calibrated and stored internally in the chamber. Since the calibration
data is stored in the chamber, they are interchangeable with any base unit.
A test in progress can be aborted by pressing the key, by disconnecting the chamber or by
water not being detected at the bottom sensor.
18 GMC-I Messtechnik GmbH
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt SECULIFE IF plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt SECULIFE IF plus in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info