590784

Gossen Metrawatt SECULIFE ES XTRA Manual

9
Zoom out
Zoom in
Previous page
1/130
Next page
GMC-I Messtechnik GmbH 9
SECULIFEESXTRA
The SECULIFE ESXTRA Electrosurgical Analyzer is a high-accuracy True RMS RF Measurement system
designed to be used in the calibration and routine performance verification of Electrosurgical Generators.
It offers a higher degree of accuracy than previously attainable with conventional Electrosurgical Unit
Analyzer designs. The SECULIFE ES
XTRA provides an advanced low reactance internal load bank with a
range of 0 to 6400 ohms in 1 ohm increments. It is microprocessor based and utilizes a combination of
unique hardware and software to provide accurate and reliable test results, even from "noisy"
Electrosurgical Generator waveforms such as "Spray". The Patent Pending DFA® Technology utilized in
the SECULIFE ES
XTRA allows the system to aggressively digitize the complex RF waveforms produced
by Electrosurgical Generators, analyze each individual digital data point, and provide highly accurate
measurement results.
The SECULIFE ES
XTRA, unlike many conventional ESU Analyzers, has internal high voltage setup relays
to control the measurement path, allowing the user to switch between Power measurements, Leakage
measurements, REM/ARM/CQM testing, or even run an autosequence that could include any or all of
these tests - without even moving wires around!
The current transformer internal to the SECULIFE ES
XTRA senses the RF current flowing through the
internal test load and produces a ratiometric voltage which is digitized and analyzed by the
microprocessor. Combining the standard and low ranges of the SECULIFE ES
XTRA with the use of the
current transformer, the user has full control over the ability to get high accuracy and high resolution
readings from all types of Electrosurgical Generators.
The following are highlights of some of the main features:
• TRUE RMS READINGS USING DFA® TECHNOLOGY
• INDUSTRY STANDARD CURRENT SENSING TECHNOLOGY
• mV, mV PEAK, mA, CREST FACTOR AND POWER (WATTS) RANGES
• COLOR QVGA DISPLAY WITH TOUCHSCREEN
• 1% OF READING MEASUREMENT ACCURACY
• DIGITAL CALIBRATION – NO POTS TO TURN
• SELECTABLE DISPLAY OPTIONS
• GRAPHICAL ON-SCREEN REPRESENTATION OF MEASURED RF SIGNAL
• HIGH RANGE (1000 mV) AND LOW RANGE (100 mV) WITH AUTOSCALING
CAPABILITY
• PULSED RF WAVEFORM MEASUREMENT MODE FOR LOW DUTY CYCLE PULSED
OUTPUTS OFFERED BY SOME ELECTROSURGICAL MANUFACTURERS
• PROGRAMMABLE AUTOSEQUENCES
• PROGRAMMABLE LOAD CURVES
• BUILT IN CQM TESTING WITH ONE OHM RESOLUTION
• TISSUE RESPONSE TESTING WITH GRAPHING CAPABILITY
DESCRIPTION
SECULIFEESXTRA
ELECTROSURGICAL UNIT ANALYZER
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt SECULIFE ES XTRA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt SECULIFE ES XTRA in the language / languages: English as an attachment in your email.

The manual is 7,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info