Manual Gossen Metrawatt SECULIFE ES PRO (page 22 of 52) (English)

590783

Zoom out

Zoom in

1/52

SECULIFE ESPRO

INPUT ZERO – The Input Zero offset can be slightly different between RF donuts. This parameter

accesses an auto-zeroing function that eliminates this offset. Independent settings are saved for the

0.1:1 RF donut and 1:1 RF donut. The user can switch between the two donut types without having to re-

zero the input. The input needs to be zeroed only when a new donut is introduced.

INPUT RANGE

– The input range can be scaled to accommodate the signal that is being measured. The

input can be set to fixed ranges of 100mV Peak, 1000mV peak or Auto-Ranging. For Auto-Ranging

mode, the low range will be used for readings from 0.00 to 30.00 mV RMS. The high range will be used

for 20.0 to 700.0 mV RMS.

INPUT MODE

– There are two input modes to allow for measurement of continuous signals or pulsed

signals. In Continuous Mode, the input is updated every 100 mS. This mode should be used for all

Electrosurgical Generator waveform outputs in general use generators. A number of Electrosurgical

generator manufacturers offer generators with pulsed outputs, where there is a long duty cycle (typically

½-second or more) and the actual RF output of the generator is active for a brief period of time within the

duty cycle (typically 1/10

second or less). In Pulsed Mode, the input to the SECULIFE ESPRO is only

processed when a signal over 20 mV in amplitude is detected. The

SECULIFE ESPRO analyzes the

pulsed input waveform and can provide the RMS readings for either the overall input or the pulse only

(see Diagram 1, Page 15).

NOTE: When set to Pulsed

Mode, a small graphic appears in

the upper right corner of the

screen to identify to the user that

the

SECULIFE ESPRO is

looking for a pulsed RF input.

22 GMC-I Messtechnik GmbH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt SECULIFE ES PRO in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gossen Metrawatt SECULIFE ES PRO Manual

Product: