776259
18
Zoom out
Zoom in
Previous page
1/62
Next page
18 GMC-I Messtechnik GmbH
Test Standard
The following must be substantiated per
DIN VDE 0100-600:2008:
Touch voltage occurring at nominal residual current may not
exceed the maximum allowable value for the system.
Tripping of the RCCB must occur within 400 ms (1000 ms for
selective RCDs) at nominal residual current.
Important Notes
•The PROFITEST INTRO permits simple measurements at all
types of RCDs. Select RCD, SRCD, PRCD etc.
Measurement must be executed at one point only per RCD
(RCCB) within the connected electrical circuits. Low-resis-
tance continuity must be substantiated for the protective con-
ductor at all other connections within the electrical circuit (RLO
or UB).
The measuring instruments often display 0.1 V touch voltage
in TN systems due to low protective conductor resistance.
Be aware of any bias currents within the system. These may
cause tripping of the RCDs during measurement of touch volt-
age UB, or may result in erroneous displays for measurements
with rising current: Display = IF
- Ibias_current
Selective RCDs identified with an can be used as the sole
means of protection for automatic shutdown if they adhere to
the same shutdown conditions as non-selective RCDs (i.e.
ta< 400 ms). This can be substantiated by measuring break-
ing time.
Type B RCDs may not be connected in series with type A or F
RCDs.
Note
Bias Magnetization
Suppression of RCD tripping by means of bias magneti-
zation with direct current is only possible via a country-
specific measuring adapter, e.g. PRO-Schuko measuring
adapter (Z503K) or the KS-PROFITEST INTRO (Z503L) for
3-pole measurement.
7.1 Measuring Touch Voltage (with reference to nominal resid-
ual current) with 1/3 Nominal Residual Current and Tripping
Test with Nominal Residual Current
Select the Measuring Function
Connection
Setting Parameters for IΔN
S
IΔN
Nom. res. current:
10 ... 500 mA
Type 1:
RCD, SRCD, PRCD etc.
Nominal current: 6 ... 125 A
Type 2: AC , A/F ,
B/B+ *, EV/MI
* Type B/B+/EV/
MI
=
AC/DC sensitive
Phase displacement: 0°/180°
X times tripping current
Negative/positive half-wave
Positive direct current
1, 2, 5 (IΔN max. 300 mA)
Waveform:
Touch voltage:
Time to trip:
< 25 V, < 50 V, < 65 V
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt Profitest Intro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt Profitest Intro in the language / languages: English as an attachment in your email.

The manual is 1.69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info