590777

Gossen Metrawatt PROFITEST MXTRA Manual

73
Zoom out
Zoom in
Previous page
1/96
Next page
GMC-I Messtechnik GmbH 73
18 LED Indications, Mains Connections and Potential Differences
Status
Test
plug
Meas.
Adapter
Position of the
Function Switch
Function / Meaning
LED Indications
NETZ/
MAINS
Lights up
green
X
I
N
/ I
F
Z
L-N
/ Z
L-PE
/ R
E
U, Z
ST
, kWh, IMD,
int. ramp, RCM
Correct connection, measurement enabled
NETZ/
MAINS
Blinks
green
X
I
N
/ I
F
Z
L-N
/ Z
L-PE
/ R
E
U, Z
ST
, kWh, IMD,
int. ramp, RCM
N conductor not connected,
measurement enabled
NETZ/
MAINS
Lights up
orange
X
I
N
/ I
F
Z
L-N
/ Z
L-PE
/ R
E
Line voltage of 65 V to 253 V to PE, 2 different phases active (no N con-
ductor at mains), measurement enabled
NETZ/
MAINS
Blinks red
XX
I
N
/ I
F
Z
L-N
/ Z
L-PE
/ R
E
U, Z
ST
, kWh, IMD,
int. ramp, RCM
1) No line voltage or
2) PE interrupted
NETZ/
MAINS
Lights up
red
XR
ISO
/ R
LO
Interference voltage detected, measurement disabled
NETZ/
MAINS
Blinks Yel-
low
X
I
N
/ I
F
Z
L-N
/ Z
L-PE
/ R
E
L and N are connected to the phase conductors.
U
L
/R
L
Lights up
red
XX
I
N
R
ISO
/ R
LO
– Contact voltage U
IN
and U
I
>25V respectively >50V
– Safety shut-down has occurred
– Limit value exceeded or fallen short of for R
ISO
/ R
LO
function
FI/RCD
Lights up
red
XX
I
N
/ I
F
int. ramp
The RCCB was not tripped, or was tripped too late during the tripping
test.
Mains Connection Test — Single-Phase System — LCD Connection Pictographs
is dis-
played
All except for U No connection detected
is dis-
played
All except for U Connection OK
is dis-
played
All except for U L and N reversed, neutral conductor charged with phase voltage
is dis-
played
All except for U and RE
No mains connection
RE Standard display without connection messages
is dis-
played
All except for U Neutral conductor interrupted
is dis-
played
All except for U
Protective conductor PE interrupted,
neutral conductor N and/or phase conductor L charged with phase volt-
age
is dis-
played
All except for U
Phase conductor L interrupted,
neutral conductor N charged with phase voltage
is dis-
played
All except for U Phase conductor L and protective conductor PE reversed
is dis-
played
All except for U
Phase conductor L and protective conductor PE reversed
Neutral conductor interrupted (with probe only)
is dis-
played
All except for U L and N are connected to the phase conductors.
?
?
?
N
PE
L
N
PE
L
N
PE
L
N
PE
L
x
N
PE
L
x
N
PE
L
x
N
PE
L
N
PE
L
x
N
PE
L
… 73 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt PROFITEST MXTRA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt PROFITEST MXTRA in the language / languages: English as an attachment in your email.

The manual is 2,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gossen Metrawatt PROFITEST MXTRA

Gossen Metrawatt PROFITEST MXTRA User Manual - Dutch - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info