Manual Gossen Metrawatt PROFITEST MXTRA (page 64 of 96) (English)

590777

Zoom out

Zoom in

1/96

64 GMC-I Messtechnik GmbH

15 Automatic Test Sequences – AUTO Function

If the same order of tests with subsequent report generation is to

be performed repeatedly, as is, for example, specified by certain

standards, we recommend using test sequences.

With the help of test sequences it is possible to compile auto-

matic test procedures on the basis of the manual individual mea-

surements. A test sequence consists of up to 200 individual test

steps which have to be processed one after the other.

Basically, a distinction is made between three types of individual

steps:

• Note: the test procedure is interrupted by a pop-up note for

the test engineer. It is not continued before the test engineer

acknowledges the note.

Example: Note prior to insulation resistance measurement:

„Disconnect the device from the mains!“

• Visual inspection, testing and report: the test procedure is inter-

rupted by a pop-up window of a passed/failed evaluation,

comments on and results of the evaluation are saved in the

database.

• Measurement: Measurement like the individual measurements

performed by the test instruments with data storage and

parameter configuration.

The test sequences are created at a PC by means of the ETC

software and are then transferred to the test instruments.

The measurement parameters are also configured at a PC. How-

ever, they can still be modified at the test instrument during the

test procedure before the respective measurement is launched.

After restarting the test step, the parameter settings defined in

ETC are loaded.

Note

The parameters are not subjected to a plausibility check

by the ETC software. We therefore advise you to test the

newly created test sequence at the test instrument before

filing it permanently in your database.

Limit values are currently not defined in ETC, but have to be

adjusted during the automatic test sequence.

Menu for the Processing of Test Sequences

In order to process existing test sequences, to add, for example,

further test sequences or to adjust parameter settings, they have

to be loaded to the ETC PC software beforehand.

There are two possibilities to do this:

•ETC: Extras  Test sequences  Load test sequences

(from file „pruefsequenzenxyz.seq“)

• ETC: Device  Test sequences  Receive test sequences

(from the connected test instrument PROFITEST MPRO or

PROFITEST MXTRA)

Step-by-step Overview: Generating Test Sequences at the PC

1 Generate new test sequence – enter denomination

2 Change denomination of the selected test sequence

3 Duplicate selected test sequence,

(copy) is added at the end of the duplicated name

4 Delete selected test sequence

5 Generate and/or add new test step for selected test sequence

– Choose the type of test step from the list and accept or modify the

denomination

6 Duplicate selected test step

7 Delete selected test step

8 Change the order of the selected test steps

9 Select measuring parameters for the selected type of test step from the list

10 Choose the setting for the measuring parameters from the list

11 Accept modification for the measuring parameter

12 Close test sequence menu

Saving Test Sequences to the ETC Software at the PC

We recommend saving the test sequences of the default setting,

modified as well as newly created test sequences via command

„Extras  Test sequences  Save test sequences“ to the PC or

other storage media under a file name (testsequencesxyz.seq).

This helps to prevent data loss as a result of certain administrative

operations, see the following remarks.

As a maximum of 10 test sequences can be transferred to the

test instrument, it is not possible to save more than 10 test

sequences in one file.

Via command „Extras  Test sequences  Load test

sequences“ the test sequences saved to a file can be reloaded to

the ETC software at any time.

For subsequent processing select command

„Extras  Test sequences  Edit test sequences“.

Please note that the active test sequences in the ETC software are

deleted by the following operations:

• by receiving test sequences from the test instrument

(ETC: Device  Test sequences  Receive test sequences)

• by changing the user language (ETC: Language  ...)

• by saving the data from the test instrument

(ETC: Device  Backup/Restore  Backup)

1 2 3 4

5 6 7

109

11 12

Verwendetes Prüfgerät

auswählen!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt PROFITEST MXTRA in the language / languages: English as an attachment in your email.

The manual is 2,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gossen Metrawatt PROFITEST MXTRA

Gossen Metrawatt PROFITEST MXTRA User Manual - Dutch - 92 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gossen Metrawatt PROFITEST MXTRA Manual

Product: