590647
11
Zoom out
Zoom in
Previous page
1/40
Next page
GMC-I Messtechnik GmbH 11
List of all parameters (alphabetical order)
3.3.2 Querying Parameters – InFo Menu (as moving letters)
bAtt Query Battery Voltage
1nFo bAtt: 12.05 V.
vErSion – Query Firmware Version
1nFo bAtt: uErS ion: 1.0.0
3.3.3 Entering Parameters – SEt Menu
rLEAd – Offset Resistance for Low-Resistance Measurement
Measurement cable ohmic resistance can be subtracted from the
measurement results automatically. Offset must be determined
and saved to memory via the rLEAd parameter to this end.
Ð Connect the measurement cables to the + and COM jacks.
Ð Short circuit the two test probes connected to the measure-
ment cables (including extension cables).
Ð Select the rLEAd parameter and acknowledge by pressing the
ENTER key. Select ZERO and acknowledge by pressing the
START key in order to trigger measurement of offset resistance:
1nFo
SET rlead
zero / Clear 
Low-resistance measurement as described in section 8.1 is con-
ducted in both directions with automatic polarity reversal.
Note
If the test probes are not short circuited, the SHort LEAdS
prompt appears at the display.
The measurement results, i.e. the resistance of the two measure-
ment cables, are subtracted from future low-resistance measure-
ments as an offset value, and ZERO appears in the footer.
After selecting the CLEAr parameter and acknowledging by
pressing the ENTER key, you’re provided with the opportunity of
performing future measurements without using the offset. If this is
the case, ZERO is no longer displayed. In this case, measurement
cable resistance is included in the measurement.
Parame-
ter
Page: Header
0
.
d
iSP
13: 0.diSP – Show/Hide Leading Zeros
A
.
d
iSP
12: A.diSP – Analog Display: Select Display Mode
APoFF
12: APoFF – Specified Time for Automatic Shutdown and Continuous ON
bAtt
11: bAtt – Query Battery Voltage
bEEP
12: bEEP – Acoustic Indication of Exceeded Limit Values
blight
12: bLiGt – Switching LCD Illumination On/Off
Com
For service purposes only
1nfo
11: Querying Parameters – InFo Menu (as moving letters)
liled
13: LiLEd – Optical Indication of Limit Value Violations
SET
11: Entering Parameters – SEt Menu
uErS
ion
11: vErSion – Query Firmware Version
rlead
11: rLEAd – Offset Resistance for Low-Resistance Measurement
START
ENTER
START
ENTER
START
ENTER
START
ENTER
START
ENTER
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt METRISO TECH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt METRISO TECH in the language / languages: English as an attachment in your email.

The manual is 1,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gossen Metrawatt METRISO TECH

Gossen Metrawatt METRISO TECH User Manual - German - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info