590652

Gossen Metrawatt METRISO 5024 Manual

6
Zoom out
Zoom in
Previous page
1/14
Next page
6 GMC-I Messtechnik GmbH
3.4 Checking Device Functions
The METRISO 5024 functions as a voltmeter when the toggle switch
(4) is in the neutral position:
Ð The voltmeter function can be checked by applying a voltage to
both test probes (1 and 8), e.g. line voltage from a mains outlet.
The rotary switch must be set to any of positions 100 V, 250 V or
500 V.
Ð When the toggle switch (4) is in either the Ω or MΩ position, the
batteries are activated and the METRISO 5024 remains in the
selected function as long as the toggle switch is activated.
Measurements in the Ω and MΩ ranges are evaluated by means
of the green LED (10), the beeper and the pointer.
Ð The ohmmeter function – rotary switch in the Ω position and toggle
switch in the Ω position – can be tested by short-circuiting the
two test probes (1 and 8): 0 Ω appears at the display,
continuous acoustic signal from the beeper.
Avoid open test probes (resistance approaching ∞), (pointer
oscillates, periodic sequence of acoustic signals from the
beeper).
Ð The insulation measuring function – rotary switch in the xxx V
position and toggle switch in the MΩ position – can be tested
with the help of the two limit values: Short-circuit the two test
probes (1 and 8): Pointer oscillates, periodic sequence of
acoustic signals from the beeper, green LED blinks; separate the
test probes: ∞ appears at the display, continuous acoustic signal
from the beeper, green LED lights up.
Display accuracy can be tested using the ISO Calibrator 1 (article no.
M662A) as an accessory by connecting it to the low or high value
resistor.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt METRISO 5024 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt METRISO 5024 in the language / languages: English as an attachment in your email.

The manual is 0,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info