Manual Gossen Metrawatt METRAOHM 413 (page 21 of 48) (English, German, French)

590656

Zoom out

Zoom in

1/48

+/-

4. Measuring and testing

4.1 General information

Pushbutton functions:

Switch-on/-o, self-test (3.)

Zero balance (4.3)

Measuring (4.4)

Zero balance (4.3)

Polarity reversal (4.4.1)

Automatic mode (4.4.2)

Call up measured values (4.4.2)

4.2 Measurement setup

Any measurement line (up to approx. 3.5 Ω) can be

used between the reference earth (e. g. equipoten-

tial bonding conductor) and the METRAOHM 413,

which can be adjusted as described in section 4.3.

Measurement locations at distances over 100 m

can be reached. In environments with strong field

influences the circuit line should be reeled off com-

pletely, so that inductive influences can be avoided.

 Fix the measuring line to the reference earth

while ensuring good electrical conductivity

(remove any corrosion).

 Connect the free end of measuring line to the

lower socket of METRAOHM 413. When using the

uncoiling reel, the included short measuring line

must be plugged into the socket of the reel.

Only with mounted safety

cap on the test electrode

of the measuring line tests

in CAT III enviroments are

permitted in accordance

with EN 61010-031.

The safety cap can be dismounted (e.g. for 4 mm

sockets) by lifting the snap lock with a sharp object.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt METRAOHM 413 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gossen Metrawatt METRAOHM 413 Manual

Product: