590623
23
Zoom out
Zoom in
Previous page
1/36
Next page
23
3. Putting into operation
3.1 Battery
Your instrument is already supplied with an energie-
block. Solely use the following energyblocks:
NiMH accumulator for class I and II T4:
type Z209A EXM-AK9
Lithium battery for class I and II T6:
type Z209B EXM-LB3
Attention!
Please observe section 6 before initial startup or
after your device has been in storage for a long
period of time.
3.2 Testing display and function
At every day of use the METRALINE EXM25 has to
be checked to ensure that it works properly and
faultlessly.
Self test 1 (Display test):
Press and hold button „ON/OFF“.All display seg-
ments light up on the display, additionally the V-LED
and the Ω-LED light up. When you release button
„ON/OFF“, the value 000 ... 001 V is indicated on the
display.
Self test 2 (Voltage measuring line):
Connect and lock the voltage measurement tips
EXM 72010 to the 7-pin universal connector. Switch-
on the device. Display: 000..001 V, in the upper
display line 1000 V. Put the test electrodes, one after
another, inclined 5 mm into the W-socket. Display
shows ‘Test’ and ‘rdy’ and green LED lights up.
Note:
In case the display continues showing 000 V the
measurement tip is damaged, please exchange.
Self test 3 (Voltage indication):
Check functions at a known voltage source - e.g. a
230 V socket.
Self test 4 (Resistance measurement):
Put the standard test lines into the Ω- and -socket.
Adjust the device to Ω, display: OL kΩ, hold test
prods together, display indication needs to be about
0.0 Ω and the green LED needs to light up.
Attention!
If indication of one or several systems fail in the
course of performing the self test, if function stand-
by is not indicated or if the device is damaged, the
METRALINE EXM25 must not be used again.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt METRALINE EXM25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt METRALINE EXM25 in the language / languages: English, German as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info