590624
66
Zoom out
Zoom in
Previous page
1/74
Next page
66 GMC-I Messtechnik GmbH
Maintenance – Calibration
9 Maintenance and Calibration
Attention!
!
Disconnect the instrument from the measuring circuit before
opening the battery compartment lid or fuse cover in order
to replace batteries or fuses!
9.1 Displays – Error Messages
9.2 Batteries
Note
Removing the Batteries During Periods of Non-Use
The integrated quartz movement draws power from the bat-
teries even when the instrument is switched off. It’s advis-
able to remove the batteries during long periods of non-use
for this reason (e.g. vacation). This prevents excessive
depletion of the batteries, which may result in damage under
unfavorable conditions.
Note
Battery Replacement
Stored measurement data are lost when the batteries are
replaced. The selected operating parameters remain in
memory, although date and time must be reentered.
Charge Level
The current battery charge level can be queried in the “1nfo
menu:
1nFo bAtt: 2.75 V.
Make sure that no battery leakage has occurred before initial
start-up, as well as after long periods of storage. Continue to in-
spect the batteries for leakage at short, regular intervals.
If battery leakage has occurred, carefully and completely clean the
electrolyte from the instrument with a damp cloth, and replace the
battery before using the instrument.
If the “ ” symbol appears at the display, the batteries should
be replaced as soon as possible. You can continue working with
the instrument, but reduced measuring accuracy may result.
The instrument requires two 1.5 V batteries in accordance with
IEC R 6 or IEC LR 6, or two equivalent rechargeable NiMH batter-
ies.
Message Function Meaning
FUSE
Current measurement Blown fuse
In all operating modes Battery voltage has fallen below 1.8 V
0L
Measuring Indicates overflow
MEASURE
SETUP
FUNC
ENTER
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt METRAHIT ULTRA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt METRAHIT ULTRA in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info