590625

Gossen Metrawatt METRAHIT ULTRA BT Manual

71
Zoom out
Zoom in
Previous page
1/74
Next page
GMC-I Messtechnik GmbH 71
Accessories
10.4 Interface Accessories (not included)
10.4.1 Infrared Interface
USB X-TRA Bidirectional Interface Adapter
STARLINE multimeters which are equipped with a serial IrDa inter-
face can be connected to a USB port at a PC with the adapter.
The adapter allows for data transmission between the multimeter
and the PC.
METRAwin10 PC Evaluation Software (for METRAHIT ULTRA
as of 2013)
METRAwin10 PC software is a multilingual, measurement data log-
ging program for recording, visualizing, evaluating and document-
ing measured values from METRAHIT multimeters.
10.4.2 Bluetooth Interface
USB Bluetooth Adapter for PC
The following Bluetooth adapters for communication between
METRAHIT ULTRA and PC have been successfully tested so far:
Belkin F8T016NG and LOGI LINK BT0007
Bluetooth adapters by other manufacturers should fulfill the fol-
lowing technical minimum requirements:
Bluetooth 2.1 + EDR, class 2
Terminal program for PC
Indication and evaluation of the measured values received via a
Bluetooth adapter can be effected via a terminal program.
METRALOG App for Smartphone and Tablet PC
Provided you have a smartphone or tablet PC with Android oper-
ating system and Bluetooth interface, our METRALOG app in com-
bination with the METRAHIT ULTRA BT TRMS Digital Multimeter of-
fers the following functions:
• Indication of measured values received from the multimeter as:
digital or analog values, measured value curve Y(t)
and measured value logger
• Recording of measuring transactions
• Transmission of logs via wireless and network services
• Acoustic warning signal when radio contact is interrupted
• Trigger for exceeding/falling short of adjustable limit
• SMS and/or acoustic warning signal for trigger event
The
METRALOG
app can be obtained via the Google
Play Store (see
QR
code on the right) and installed on
your smartphone or tablet PC (Operating System
minimum Android 2.3.3).
Attention:
For any errors in
the software especially through interaction with other
applications, any liability is excluded.
Short-form Instructions
1 Touch the app icon to start the program.
2Select METRAHIT ULTRA BT from the list of recivable Bluetooth devices.
The following message is displayed: „Bluetooth connection to measuring
instrument being established“.
3 To establish the radio communication, enter the same pin you have already
entered for the interface parameter
bt pin
of the multimeter, see section 7.2.
When the connection has been successful, an analog display appears in which
the following message is shown at the bottom right „Measurement in process“.
4 You can switch between digital display, measured value curve Y(t) and ana-
log display in the bottom line on the left.
5 By touching the REC symbol, you can start or stop the recording of the
measured values.
6 Touching the magnifier symbol in the bottom line on the right takes you to
the measured value logger overview where you can select measuring inter-
vals for graphic representation of for transmission.
… 71 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt METRAHIT ULTRA BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt METRAHIT ULTRA BT in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info