590607
23
Zoom out
Zoom in
Previous page
1/72
Next page
GMC-I Messtechnik GmbH 23
Control Functions
4.5 Measurement Data Recording
The cable multimeter is capable of recording measurement data
using an adjustable sampling rate for long periods of time in the
form of measurement series. Data are stored to a battery-backed
memory module, and are retained even after the multimeter is
switched off. The system acquires measured values relative to
real-time.
Stored measured values can subsequently be read out with the
help of METRAV
IEW software. The only prerequisite is a PC
which is connected by means of an interface cable to the
USBX-
TRA bidirectional interface adapter, which is plugged onto
a cable multimeter. See also chapter 7, “Interface Operation”.
Memory Parameters Overview
The STORE Menu Function
Ð First set the sampling rate for memory mode operation (see
chapter 6.4 the rAtE parameter) , and then start memory mode
operation.
Ð First select the desired measuring function and an appropriate
measuring range.
Ð Check the battery charge level before starting long-term
measurement recordings (see chapter 6.3).
Connect the NAX-TRA power pack if required.
Starting Recording via Menu Functions
Ð Switch to the “SETUP” mode by pressing MEASURE | SETUP, and
select the “StorE” menu.
1nFo
... StorE 000.0 % StArt
Ð Memory mode operation is started by activating FUNC | ENTER.
STORE appears underneath the analog display and indicates
that the memory mode has been activated. “StoP” appears at
the digital display.
Ð Press MEASURE | SETUP in order to return to the measuring
function.
Parameter Page: Header
CLEAr
24: Clear Memory
EMpty
24: Clear Memory – appears after CLEAr
0CCUP
24: Querying Memory Occupancy
rAtE
51: rAtE – set the sampling rate
StArt
23: Starting Recording via Menu Functions
StoP
24: Ending Recording
MEASURE
SETUP
FUNC
ENTER
FUNC
ENTER
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt METRAHIT T-COM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt METRAHIT T-COM in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gossen Metrawatt METRAHIT T-COM

Gossen Metrawatt METRAHIT T-COM Quick start guide - English, German - 2 pages

Gossen Metrawatt METRAHIT T-COM Quick start guide - Dutch - 3 pages

Gossen Metrawatt METRAHIT T-COM User Manual - Dutch - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info