590622
9
Zoom out
Zoom in
Previous page
1/36
Next page
GMC-I Messtechnik GMBH 9
GB
Shutdown is acknowledged with two, brief acoustic sig-
nals.
Switching the Milliohmmeter Off Automatically – „SLEEP MODE“
The instrument is switched off automatically if none of the
keys are activated for approximately 10 minutes. Shut-
down is acknowledged with a brief acoustic signal.
Transmission mode: In this case, checking is first performed
to determine whether or not the sampling rate has been set
to a value of greater than 10 s. The instrument is switched
off after 10 minutes, but the instrument is reactivated 10 s
before data is to be saved to memory. The instrument is
then switched back off again.
In the transmission mode, the instrument can be manually
activated with the ON|OFF key. After activation of this type,
the instrument returns to the “SLEEP MODE”.
If the instrument is to be fully shut down, it must first be
activated and then switched off with the ON|OFF key. This
ends both memory mode and transmission mode
operation.
We recommend setting the instrument to continuous
operation for transmission mode operation.
The continuous operation mode is not effected by auto-
matic shutdown.
Disabling Automatic Shutdown
The instrument can be set to continuous operation.
Press and hold the MENU/ESC key and then switch the
instrument on by pressing the ON|OFF key. Continuous
operation is indicated at the display with the symbol.
Switching LCD Illumination On and Off
Briefly press the ON|OFF key after the instrument has al-
ready been switched on.
Illumination is switched off automatically after approxi-
mately 2 minutes.
Note: Electrical discharge and high frequency interference
may cause incorrect displays to appear, and may disable
the measuring sequence. In such cases, switch the instru-
ment off and back on again in order to reset.
If the problem persists,
1 leave the potentially explosive environment,
2 disconnect the instrument from the measuring circuit before open-
ing and refer to chapter 10.1 „Batteries“,
3 Briefly dislodge the batteries from the connector contacts.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt METRAHIT 27EX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt METRAHIT 27EX in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info