590630

Gossen Metrawatt MAVOWATT 20 Manual

158
Zoom out
Zoom in
Previous page
1/228
Next page
A-5
APPENDIX A/ Optional Accessories
Current probes
Several Dranetz-BMI current probes can be used with Energy Platform: models
TR2500/A, TR2510, TR2520/A, TR2530/A, TR2540/A, TR2550/A, TR2019B,
TR2021, TR2022A, TR2023. The Energy Platform supports both DRANFLEX and
FLEXIBLE current probes. Typical current probes are illustrated in Chapter 2.
TR2500, TR2510, TR2520 (TR2500A, TR2510A, TR2520A)
: These models will
measure rms currents from 10 to 500 A, 0.1 to 500 A, 300 to 3000 A, respectively.
They plug directly into any of the current inputs on the rear panel. These probes are not
recommended for measuring medium or high frequency transients.
TR2021, TR2019B, TR2022, TR2023
: These four probes are made for the Dranetz-
BMI model 658 but can be used with the Energy Platform by using an adapter cable
(part number CA4300). They can measure rms currents in ranges of 1 to 30 A, 1 to 300
A, 10 to 1000 A, and 10 to 3000 A, respectively, and are needed to accurately measure
medium and high frequency transients.
DRANFLEX Current Probes
: DRANFLEX 3000XL/6000XL current probes allow
current measurements in the range of 0.5 to 3000 A full scale, or 0.5 to 6000 A full
scale. These probes are available in three sizes: 24” probe length - conductor(s) up to 8”
diameter; 36” probe length - conductor(s) up to 11” diameter; 48” probe length -
conductor(s) up to 17” diameter.
DRANFLEX 3 Phase Current Probes
: DRANFLEX 3003XL/6003XL are 3 Phase
current probes that allow current measurements in 3 Phase circuits in the range of 0.5 to
3000 A full scale, or 0.5 to 6000 A full scale. These probes are available in three sizes:
24” probe length - conductor(s) up to 8” diameter; 36” probe length - conductor(s) up
to 11” diameter; 48” probe length - conductor(s) up to 17” diameter.
FLEXIBLE Current Probes
: RR3035A and RR6035A flexible optional current probes
allow current measurements in the range of 3 to 3000 A full scale, or 6 to 6000 A full
scale. These probes are available in three sizes: 24” probe length - conductor(s) up to 8”
diameter; 36” probe length - conductor(s) up to 11” diameter; 48” probe length -
conductor(s) up to 17” diameter.
Voltage probes
Fuse Voltage Adapter
: Two accessory kits available: FVA-1 and FVA-4. FVA-1 is used
for a single voltage measurement input. It contains one fused voltage adapter and one
measurement connecting cable (Red) 50 cm in length. FVA-4 is used for a three phase
and neutral voltage measurement inputs. It contains four voltage adapters and four
measurement connecting cables 50 cm in length (one Red, one Yellow, one Blue, one
Grey).
Single Phase Measurement Cord
: Allows measurement of a single phase circuit using a
standard AC outlet 115V for US and 250V for European, UK, and Australian countries.
Continued on next page
… 158 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt MAVOWATT 20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt MAVOWATT 20 in the language / languages: English as an attachment in your email.

The manual is 2,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info