590630

Gossen Metrawatt MAVOWATT 20 Manual

122
Zoom out
Zoom in
Previous page
1/228
Next page
6-3
CH 6/ Advanced Setup Options
RMS Variation Limit
RMS variation
setup properties
RMS stands for root mean square, a mathematical formula used to compute the
equivalent value of the voltage and current. Voltage and current changes are measured
and checked against the programmed limits. Thresholds are preset as high limits
(threshold above the programmed limit) and low limits (threshold below the
programmed limit). RMS variations result whenever voltage or current rms value rise
above or fall below the threshold limits.
The Energy Platform limits are fixed at IEEE 1159 standard default values of 90% of
normal for sag (dip), 110% for swell, and 10% for interrupts. However the user has the
option to enable/disable rms variations.
RMS trigger
parameters
In order for the instrument to trigger on rms variation, any one of the measured
quantities for which a trigger is enabled must go above the High Limit or below the
Low Limit for a period of at least one rms sample point (which are taken twice per
cycle with a one cycle sliding integration window).
The disturbance end point is defined as the cycle when all channels for which triggers
are enabled have come back within limits (plus hysteresis). Until this criteria is met,
any subsequent excursions beyond the thresholds are considered part of the original
disturbance. To minimize the number of triggers recorded for a sequence of closely
spaced disturbances, hysteresis is employed in both voltage and time for the begin-
event and end-event thresholds.
NOTE: Hysteresis values assigned to limits are set by the system and not
programmable by the user.
… 122 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt MAVOWATT 20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt MAVOWATT 20 in the language / languages: English as an attachment in your email.

The manual is 2,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info