590630

Gossen Metrawatt MAVOWATT 20 Manual

84
Zoom out
Zoom in
Previous page
1/228
Next page
5-1
CHAPTER 5
Start Menu
Overview
Start menu
options
The Start Menu allows users to perform the following: set up the Energy Platform for
monitoring of an electrical system, load previously saved setups from card, and load
data from card.
There are three ways to set up the instrument for monitoring. The length of time to
monitor a circuit can vary from a few hours to a few weeks depending on the user
application.
•Automatic Setup
automatically configures the instrument’s circuit type, voltage and
current channels, and parameter thresholds. The auto-configured setup enables users
to proceed directly with data monitoring.
•Wizard Setup
takes the user through a series of screens prompting for information
about the circuit to be monitored. The unit automatically turns on the correct voltage
and current channels when user selects a circuit type. Parameter thresholds are
automatically set based on the line voltage and current values that the user enters.
Threshold limits for capturing events are also set according to the monitoring mode
selected.
• Advanced setup options
(see Chapter 6) allow the user to modify trigger parameters
and intervals that were previously set up through Automatic or Wizard setups. Under
advanced setup, each channel must be turned on individually, but any combination
can be used. The user can turn on any available parameter. Users have wider control
over all setup functions when using advanced setup options.
Selection of setup method typically depend on user application and extent of familiarity
with the operation of the intrument.
Monitor same circuit
makes use of the existing setup for monitoring. If a template of
setups has been previously saved to the card, you may load it using the menu below.
Load setup template from card
enables you to use previously saved setups. If you wish
to load a previously saved data file from the card, use the menu below.
Load data from card
allows you to transfer saved events from data card to the Energy
Platform.
… 84 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt MAVOWATT 20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt MAVOWATT 20 in the language / languages: English as an attachment in your email.

The manual is 2,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info