571667
39
Zoom out
Zoom in
Previous page
1/48
Next page
GOSSEN Foto- und Lichtmesstechnik GmbH 15
2.5 Contrast measurements
Use the Function button to select the function "Exposure ambient light".
Keep the measuring key M pressed down and the meter will switch over
to contrast measurement. Continue holding down the key to measure
various other areas in the subject. In the display, the difference between
the individual results of the additional measurements and the first
measuring value will be indicated in EV. A new metering will be made
approx. 2 times a second. After you have released the measuring key M,
the value of the first exposure measurement will reappear.
2.6 Setting correction values
In order to deliberately change the exposure of your photos, you may adjust the factory calibration.
Remove the battery from the exposure meter and press one of the buttons (battery memory will
be deactivated). Put the battery back in the compartment. The meter will then make the self-test.
During this test, keep the measuring key and also the Function button pressed down until the
acoustic signal sounds. Release the key to enter the CORRECTION function. Use the measuring
key M to enter or change the correction value.
Press the function button again and hold it down until the OK signal sounds to return the meter to the
normal measuring functions. The EV in the display will blink to remind you that the standard factory
calibration has been changed. Input of the correction in1/3-stops in the range of ± 3 EV.
For cancelling the correction value, remove the battery from the compartment and then put it back
again. In case of over-exposure a positive correction, in case of under-exposure a negative correction
value should be set.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen DIGISIX 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen DIGISIX 2 in the language / languages: English, German as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gossen DIGISIX 2

Gossen DIGISIX 2 User Manual - French, Spanish - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info