512902
13
Zoom out
Zoom in
Previous page
1/28
Next page
141373
Push the START button (F). Sound signal con rms the start, the
LED indicating particular washing stages stops ashing. The
machine starts operating after a few seconds. If the door is not
properly closed after starting the operation, the washing stage
indicator LED starts ashing again after a few seconds. When
you close the door, the machine initiates the selected program.
As each washing stage is completed the relevant washing stage
indicator LED goes off and the subsequent one goes on.
In case you would like to alter the washing program after the
initiated washing operation, turn the program selector for one
second to the position “0”, followed by the selection of a new
program. Switching the machine off deletes any previously
selected additional functions(i.e. Pump stop), so they have to be
reactivated.
Upon switching OFF, all additional pre-selected
functions are deleted; therefore they must be switched-
ON again.
- End of operation
Flashing LED’s for particular washing stages indicate that the
program was completed.
Sound signal indicates that you may now open the door of the
machine.
Extract the laundry from the drum and remove any alien objects
from the door gasket.
Leave the door ajar to allow the interior to dry.
Close the water inlet faucet.
Switch the machine off by turning the program selector to
position “0”.
Pull the power lead from th
e socket and cut the power supply
from the mains.
By the user
Selecting PUMP STOP function
Program is stopped when it comes to the PUMP STOP stage
(drum door remains closed all the time). Indicator LED above
the knob (E) starts ashing. Washing procedure is continued by
pressing the START knob (F).
Own (physical) interruption
You may stop the program by turning the program selector to the
position “0”. If there is water in the drum select one of additional
programs (pumping, spinning) to empty the water and terminate
the program.
Start the operationStart the operation
InterruptionsInterruptions
13
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje WU62081 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje WU62081 in the language / languages: English as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info