302943

Gorenje wt 781 Manual

7
Zoom out
Zoom in
Previous page
1/12
Next page
Instructions for Use
73
The drying temperature is selected automatically
by the selection of the drying program, and it is
lower for delicate laundry than for the resistant
one. During the drying program with preset time
the temperature is the same for both the delicate
and resistant laundry.
Drying stage indicator
Damp for machine ironing
Damp for ironing
Mildly damp
Dry for storage
Very dry
Against crease
End
The drying stage indicator displays the actual
drying stage at any given moment. This is
signaled by the indicator light, illuminated
adjacent to a particular drying stage symbol. The
end of drying is signaled by the indicator light
END or ANTI-CREASE..
START button
Starts the operation of the appliance. In case of
program interruption (open door, voltage failure,
condensation receptacle full), it serves to
continue the actual program, after the cause for
interruption had been removed.
Drying
Drying time depends upon the selected program
and the quantity of laundry. If you selected time
defined drying the machine stops upon the expiry
of set time. If you selected any of the programs
for automatic determination of moisture, drying
time will largely depend upon the quantity of
laundry and the extent of moisture present in the
laundry (spin stage).
Actual stage of moisture during the program is
indicated by the moisture stage display, so you at
any time may remove particular pieces of clothes
you wish to remain damp. When you open the
door (add or remove pieces of laundry) the drying
program stops and the drum interior is
illuminated. When you close the door the light
goes off and the program continues by pressing
the START button.
In case of voltage failure during the program, the
drying operation stops. When the mains supply is
back you need to press the START button to
continue the program.
Each program is finished by a 10 minute cooling
down period, to prevent extracting of hot laundry
from the appliance and to improve the anti-crease
function.
Drying program is completed when the beep
sounds and the indicator lights END and ANTI-
CREASE are lit. This indicates that the laundry is
dried up to the point of preset moisture stage, or
the preset drying time had expired. The drum
stops and laundry may be removed from the
machine.
In case laundry was not removed after the
completion, and the machine was not switched
off, it automatically starts a special anti crease
program. This program occasionally turns the
drum in either direction to prevent the laundry to
drop and settle to the bottom and get creased.
The program stops automatically after one hour,
but it may be interrupted at any moment by
opening the door or turning the appliance off.
Signal lamp – condensation vessel
(only with condensation type dryer)
The lamp is lit when the vessel is full, and it stops
the drying program. Once the receptacle is
emptied and reinserted, the drying program may
be continued by pressing the START button.
After drying - condensation type
dryer
• Open the dryer door.
• Clean the filter. If the filter is not cleaned
regularly, the air circulation is obstructed, the
drying time is longer, and it may also cause
overheating failure of the appliance.
• Reinsert the filter.
• Extract the laundry.
• Close the door.
• Empty the condensation receptacle.
• Occasionally clean the air cooler.
• Disconnect the mains supply.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje wt 781 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje wt 781 in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info